Surface change of gallium nitride specimens after bombardment by highly charged Pbq^＋-ions （q = 25, 35） at room temperature is studied by means of atomic force microscopy. The experimental results reveal that the s...Surface change of gallium nitride specimens after bombardment by highly charged Pbq^＋-ions （q = 25, 35） at room temperature is studied by means of atomic force microscopy. The experimental results reveal that the surface of GaN specimens is significantly etched and erased. An unambiguous step-up is observed. The erosion depth not only strongly depends on the charge state of ions, but also is related to the incident angle of Pbq^＋-ions and the ion dose. The erosion depth of the specimens in 60° incidence （tilted incidence） is significantly deeper than that of the normal incidence. The erosion behaviour of specimens has little dependence on the kinetic energy of ion （Ek = 360, 700 keV）. On the other hand, surface roughness of the irradiated area is obviously decreased due to erosion compared with the un-irradiated area. A fiat terrace is formed.展开更多
Defect engineering for SiO2 precipitation is investigated using He-ion implantation as the first stage of separation by implanted oxygen （SIMOX）. Cavities axe created in Si by implantation with helium ions. After th...Defect engineering for SiO2 precipitation is investigated using He-ion implantation as the first stage of separation by implanted oxygen （SIMOX）. Cavities axe created in Si by implantation with helium ions. After thermal annealing at different temperatures, the sample is implanted with 120 keV 8.0 ×1016 cm 2 0 ions. The Q ion energy is chosen such that the peak of the concentration distribution is centred at the cavity band. For comparison, another sample is implanted with O ions alone. Cross-sectionM transmission electron microscopy （XTEM）, Fourier transform infrared absorbance spectrometry （FTIR） and atomic force microscopy （AFM） measurements are used to investigate the samples. The results show that a narrow nano-cavity layer is found to be excellent nucleation sites that effectively assisted SiO2 formation and released crystal lattice strain associated with silicon oxidation.展开更多
In the present work, a Cz-Silicon wafer is implanted with helium ions to produce a buried porous layer, and then thermally annealed in a dry oxygen atmosphere to make oxygen transport into the cavities. The formation ...In the present work, a Cz-Silicon wafer is implanted with helium ions to produce a buried porous layer, and then thermally annealed in a dry oxygen atmosphere to make oxygen transport into the cavities. The formation of the buried oxide layer in the case of internal oxidation （ITOX） of the buried porous layer of cavities in the silicon sample is studied by positron beam annihilation （PBA）. The cavities are formed by 15 keV He implantation at a fluence of 2×10^16 cm^-2 and followed by thermal annealing at 673 K for 30 min in vacuum. The internal oxidation is carried out at temperatures ranging from 1073 to 1473 K for 2 h in a dry oxygen atmosphere. The layered structures evolved in the silicon are detected by using the PBA and the thicknesses of their layers and nature are also investigated. It is found that rather high temperatures must be chosen to establish a sufficient flux of oxygen into the cavity layer. On the other hand high temperatures lead to coarsening the cavities and removing the cavity layer finally.展开更多
In the present work,the irradiation hardening behavior of a Chinese low-activation ferritic/martensitic steel CLF-1,a candidate for fusion reactor blankets,is studied.Specimens were irradiated with high-energy14N and5...In the present work,the irradiation hardening behavior of a Chinese low-activation ferritic/martensitic steel CLF-1,a candidate for fusion reactor blankets,is studied.Specimens were irradiated with high-energy14N and56Fe ions at the terminal of a cyclotron to three successively increasing damage levels of 0.05,0.1 and 0.2 displacements per atom(dpa)at about-50°C.The energy of the incident ions was dispersed to 11 successively decreasing grades using an energy degrader,thereby generating an atomic displacement damage plateau in the specimens from the surface to a depth of 25μm,which is sufficiently broad for the Vickers hardness test.Eight different loads(i.e.98 mN,196 m N,490 m N,980 m N,1.96 N,4.9 N,9.8 N and 19.6 N)were applied to the specimens to obtain the depth profiles of the Vickers hardness by using a microhardness tester.Hardening was observable at the lowest damage level,and increased with increasing irradiation dose.A power-law correlation of the Vickers hardness with the damage level(HV0=1.49+0.76 dpa0.31)is proposed.Testing with a nano-indentation technique was also performed,and a linear relationship between the Vickers micro-hardness and the nanohardness(HV0=0.83 H0)was observed.A comparison with other RAFM steels(CLAM,JLF-1,F82 H,EUROFER97 etc.)under neutron or charged particle irradiation conditions shows that most of the RAFM steels exhibit similar power-law exponents in the dose dependence of irradiation hardening.The difference in the irradiation hardening may be attributed to differences in microstructure prior to irradiation.展开更多
The surface damage to gallium nitride films irradiated by Ar^q＋ （6≤q≤16） ions at room temperature is studied by the atomic force microscopy. It is found that when charge state exceeds a threshold value, significa...The surface damage to gallium nitride films irradiated by Ar^q＋ （6≤q≤16） ions at room temperature is studied by the atomic force microscopy. It is found that when charge state exceeds a threshold value, significant swelling was turned into obvious erosion in the irradiated region. The surface change of the irradiated region strongly depends on the charge state and ion fluence. On the other hand, surface change is less dependent on the kinetic energy nearly in the present experimental range （120 keV≤Ek≤220 keV）. For q≤14, surface of the irradiated region is covered with an amorphous layer, rough and bulgy. A step-up appears between the irradiated and un-irradiated region. Moreover, the step height and the surface roughness are functions of the ion dose and charge state, and increase with the increase of dose and charge state. Especially at and near boundary, a sharp bump like ridges in irradiated areas is observed, and there appear characteristic grooves in un-irradiated areas. For q=16, surface of the irradiated region was etched and erased.展开更多
Metallic nanoparticle （NP） shapes have a significant influence on the property of composite embedded with metallic NPs. Swift heavy ion irradiation is an effective way to modify shapes of metallic NPs embedded in an...Metallic nanoparticle （NP） shapes have a significant influence on the property of composite embedded with metallic NPs. Swift heavy ion irradiation is an effective way to modify shapes of metallic NPs embedded in an amorphous matrix. We investigate the shape deformation of Ag NPs with irradiation fluence, and 357 MeV Ni ions are used to irradiate the silica containing Ag NPs, which are prepared by ion implantation and vacuum annealing. The UV-vis results show that the surface plasmon resonance （SPR） peak from Ag NPs shifts from 400 to 377nm. The SPR peak has a significant shift at fluence lower than 1 × 10^14 ions/cm2 and shows less shift at fluence higher than 1 × 10^14 ions/cm2. The TEM results reveal that the shapes of Ag NPs also show significant deformation at fluence lower than 1 × 10^14 ions/cm2 and show less deformation at fluence higher than 1 × 10^14 ions/cm2. The blue shift of the SPR peak is considered to be the consequence of defect production and Ag NP shape deformation, Based on the thermal spike model calculation, the temperature of the silica surrounding Ag particles first increases rapidly, then the region of Ag NPs close to the interface of Ag/silica is gradually heated. Therefore, the driven force of Ag NPs deformation is considered as the volume expansion of the first heated silica layer surrounding Ag NPs.展开更多
基金Supported by National Natural Science Foundation of China(11105191,91426304)National Magnetic Confinement Fusion Program(2011GB108003)National Basic Research Program of China(2010CB832904)
基金Supported by the National Natural Science Foundation of China under Crant No 10575124, the Chinese Academy of Science （Xi-Bu-Zhi-Guang Project）, and the Director＇s Foundation of Institute of Modern Physics.
文摘Surface change of gallium nitride specimens after bombardment by highly charged Pbq^＋-ions （q = 25, 35） at room temperature is studied by means of atomic force microscopy. The experimental results reveal that the surface of GaN specimens is significantly etched and erased. An unambiguous step-up is observed. The erosion depth not only strongly depends on the charge state of ions, but also is related to the incident angle of Pbq^＋-ions and the ion dose. The erosion depth of the specimens in 60° incidence （tilted incidence） is significantly deeper than that of the normal incidence. The erosion behaviour of specimens has little dependence on the kinetic energy of ion （Ek = 360, 700 keV）. On the other hand, surface roughness of the irradiated area is obviously decreased due to erosion compared with the un-irradiated area. A fiat terrace is formed.
基金Supported by the National Natural Science Foundation of China under Grant No 10575124.
文摘Defect engineering for SiO2 precipitation is investigated using He-ion implantation as the first stage of separation by implanted oxygen （SIMOX）. Cavities axe created in Si by implantation with helium ions. After thermal annealing at different temperatures, the sample is implanted with 120 keV 8.0 ×1016 cm 2 0 ions. The Q ion energy is chosen such that the peak of the concentration distribution is centred at the cavity band. For comparison, another sample is implanted with O ions alone. Cross-sectionM transmission electron microscopy （XTEM）, Fourier transform infrared absorbance spectrometry （FTIR） and atomic force microscopy （AFM） measurements are used to investigate the samples. The results show that a narrow nano-cavity layer is found to be excellent nucleation sites that effectively assisted SiO2 formation and released crystal lattice strain associated with silicon oxidation.
文摘In the present work, a Cz-Silicon wafer is implanted with helium ions to produce a buried porous layer, and then thermally annealed in a dry oxygen atmosphere to make oxygen transport into the cavities. The formation of the buried oxide layer in the case of internal oxidation （ITOX） of the buried porous layer of cavities in the silicon sample is studied by positron beam annihilation （PBA）. The cavities are formed by 15 keV He implantation at a fluence of 2×10^16 cm^-2 and followed by thermal annealing at 673 K for 30 min in vacuum. The internal oxidation is carried out at temperatures ranging from 1073 to 1473 K for 2 h in a dry oxygen atmosphere. The layered structures evolved in the silicon are detected by using the PBA and the thicknesses of their layers and nature are also investigated. It is found that rather high temperatures must be chosen to establish a sufficient flux of oxygen into the cavity layer. On the other hand high temperatures lead to coarsening the cavities and removing the cavity layer finally.
基金sponsored by the National Magnetic Confinement Fusion Program(No.2011GB108003)National Natural Science Foundation of China(No.U1532262)。
文摘In the present work,the irradiation hardening behavior of a Chinese low-activation ferritic/martensitic steel CLF-1,a candidate for fusion reactor blankets,is studied.Specimens were irradiated with high-energy14N and56Fe ions at the terminal of a cyclotron to three successively increasing damage levels of 0.05,0.1 and 0.2 displacements per atom(dpa)at about-50°C.The energy of the incident ions was dispersed to 11 successively decreasing grades using an energy degrader,thereby generating an atomic displacement damage plateau in the specimens from the surface to a depth of 25μm,which is sufficiently broad for the Vickers hardness test.Eight different loads(i.e.98 mN,196 m N,490 m N,980 m N,1.96 N,4.9 N,9.8 N and 19.6 N)were applied to the specimens to obtain the depth profiles of the Vickers hardness by using a microhardness tester.Hardening was observable at the lowest damage level,and increased with increasing irradiation dose.A power-law correlation of the Vickers hardness with the damage level(HV0=1.49+0.76 dpa0.31)is proposed.Testing with a nano-indentation technique was also performed,and a linear relationship between the Vickers micro-hardness and the nanohardness(HV0=0.83 H0)was observed.A comparison with other RAFM steels(CLAM,JLF-1,F82 H,EUROFER97 etc.)under neutron or charged particle irradiation conditions shows that most of the RAFM steels exhibit similar power-law exponents in the dose dependence of irradiation hardening.The difference in the irradiation hardening may be attributed to differences in microstructure prior to irradiation.
基金Supported by the National Natural Science Foundation of China under Grant No GJ10575124, and the Xi-Bu-Zhi-Guang Project of Chinese Academy of Sciences.
文摘The surface damage to gallium nitride films irradiated by Ar^q＋ （6≤q≤16） ions at room temperature is studied by the atomic force microscopy. It is found that when charge state exceeds a threshold value, significant swelling was turned into obvious erosion in the irradiated region. The surface change of the irradiated region strongly depends on the charge state and ion fluence. On the other hand, surface change is less dependent on the kinetic energy nearly in the present experimental range （120 keV≤Ek≤220 keV）. For q≤14, surface of the irradiated region is covered with an amorphous layer, rough and bulgy. A step-up appears between the irradiated and un-irradiated region. Moreover, the step height and the surface roughness are functions of the ion dose and charge state, and increase with the increase of dose and charge state. Especially at and near boundary, a sharp bump like ridges in irradiated areas is observed, and there appear characteristic grooves in un-irradiated areas. For q=16, surface of the irradiated region was etched and erased.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11475230 and U1532262
文摘Metallic nanoparticle （NP） shapes have a significant influence on the property of composite embedded with metallic NPs. Swift heavy ion irradiation is an effective way to modify shapes of metallic NPs embedded in an amorphous matrix. We investigate the shape deformation of Ag NPs with irradiation fluence, and 357 MeV Ni ions are used to irradiate the silica containing Ag NPs, which are prepared by ion implantation and vacuum annealing. The UV-vis results show that the surface plasmon resonance （SPR） peak from Ag NPs shifts from 400 to 377nm. The SPR peak has a significant shift at fluence lower than 1 × 10^14 ions/cm2 and shows less shift at fluence higher than 1 × 10^14 ions/cm2. The TEM results reveal that the shapes of Ag NPs also show significant deformation at fluence lower than 1 × 10^14 ions/cm2 and show less deformation at fluence higher than 1 × 10^14 ions/cm2. The blue shift of the SPR peak is considered to be the consequence of defect production and Ag NP shape deformation, Based on the thermal spike model calculation, the temperature of the silica surrounding Ag particles first increases rapidly, then the region of Ag NPs close to the interface of Ag/silica is gradually heated. Therefore, the driven force of Ag NPs deformation is considered as the volume expansion of the first heated silica layer surrounding Ag NPs.
