Three-dimensional photonic crystal （PC） heterostructures with high quality are fabricated by using a pressure controlled isothermal heating vertical deposition technique. The formed heterostructures have higher qual...Three-dimensional photonic crystal （PC） heterostructures with high quality are fabricated by using a pressure controlled isothermal heating vertical deposition technique. The formed heterostructures have higher quality, such as deeper band gaps and sharper band edges, than the heterostructures reported so far. Such a significant improvement in quality is due to the introduction of a thin TiO2 buffer layer between the two constitutional PCs. It is revealed that the disorder caused by lattice mismatch is successfully removed if the buffer layer is used once. As a result, the formed heterostructures possess the main features in the band gap of constitutional PCs. The crucial role of the thin buffer layer is also verified by numerical simulations based on the finite-difference time-domain technique.展开更多
In this paper, an optical radiative cooler with quasi-Cantor structure is theoretically proposed and analyzed. This simple and symmetrically designed optical structure operates upon continuous thermal sources in diurn...In this paper, an optical radiative cooler with quasi-Cantor structure is theoretically proposed and analyzed. This simple and symmetrically designed optical structure operates upon continuous thermal sources in diurnal subtropical conditions, and its efficiency is much higher than natural cooling, for instance, when operating upon a typical 323.15 K continuous thermal source with a wind speed at 3 m·s^-1, it can generate a net cooling power of 363.68 W·m^-2, which is 18.26% higher than that of non-radiative heat exchange （natural cooling） under the same conditions. Additionally, several aspects are considered in its design to ensure a low cost in application, which is of great economical and environmental significance.展开更多
This paper demonstrates experimentally and numerically that a significant modification of spontaneous emission rate can be achieved near the surface of a three-dimensional photonic crystal. In experiments, semiconduct...This paper demonstrates experimentally and numerically that a significant modification of spontaneous emission rate can be achieved near the surface of a three-dimensional photonic crystal. In experiments, semiconductor coreshell quantum dots are intentionally confined in a thin polymer film on which a three-dimensional colloidal photonic crystal is fabricated. The spontaneous emission rate of quantum dots is characterised by conventional and time-resolved photoluminescence （PL） measurements. The modification of the spontaneous emission rate, which is reflected in the change of spectral shape and PL lifetime, is clearly observed. While an obvious increase in the PL lifetime is found at most wavelengths in the band gap, a significant reduction in the PL lifetime by one order of magnitude is observed at the short-wavelength band edge. Numerical simulation reveals a periodic modulation of spontaneous emission rate with decreasing modulation strength when an emitter is moved away from the surface of the photonic crystal. It is supported by the fact that the modification of spontaneous emission rate is not pronounced for quantum dots distributed in a thick polymer film where both enhancement and suppression are present simultaneously. This finding provides a simple and effective way for improving the performance of light emitting devices.展开更多
Application of the pressure controlled isothermal heating vertical deposition method to the fabrication of colloidal photonic crystals is systematically investigated in this paper. The fabricated samples are character...Application of the pressure controlled isothermal heating vertical deposition method to the fabrication of colloidal photonic crystals is systematically investigated in this paper. The fabricated samples are characterized by scanning electron microscope and transmission spectrum. High-quality samples with large transmissions in the pass bands and the sharp band edges are obtained and the optimum growth condition is determined. For the best sample, the transmission in the pass bands approaches 0.9 while that in the band gap reaches 0.1. More importantly, the maximum differential transmission as high as 0.1/nm is achieved. In addition, it is found that the number of stacking layers does not increase linearly with concentration of PS spheres in a solution, and a gradual saturation occurs when the concentration of PS spheres exceeds 1.5 wt.%. The uniformity of the fabricated samples is examined by transmission measurements on areas with different sizes. Finally, the tolerance of the fabricated samples to baking was studied.展开更多
Three-dimensional optical matters are created by combining the single beam optical trapping with the conventional Z-scan technique. Dynamic light diffraction is employed to evaluate the structure and quality of the op...Three-dimensional optical matters are created by combining the single beam optical trapping with the conventional Z-scan technique. Dynamic light diffraction is employed to evaluate the structure and quality of the optical matter formed at the optimum trapping power. The lattice constant of the optical matter is extracted based on the Bragg and Snell laws, showing that polystyrene spheres are nearly close-packed in the optical matter, confirmed by comparing the diffraction pattern of the optical matter with that of a colloidal photonic crystal fabricated by the self-assembled technique. The relatively broad diffraction peaks observed in the optical matter indicate that the density of disorders in it is higher than that in the photonic crystal. It is suggested that the optical matter possesses a random close-packed structure rather than a face centered cubic one.Three-dimensional optical matters are created by combining the single beam optical trapping with the conven- tional Z-scan technique. Dynamic light diffraction is employed to evaluate the structure and quality of the optical matter formed at the optimum trapping power. The lattice constant of the optical matter is extracted based on the Bragg and Snell laws, showing that polystyrene spheres are nearly close-packed in the optical matter, confirmed by comparing the diffraction pattern of the optical matter with that of a colloidal photonic crystal fabricated by the self-assembled technique. The relatively broad diffraction peaks observed in the optical matter indicate that the density of disorders in it is higher than that in the photonic crystal. It is suggested that the optical matter possesses a random close-packed structure rather than a face centered cubic one.展开更多
This paper demonstrates the realization of an optical switch by optically manipulating a large number of polystyrene spheres contained in a capillary. The strong scattering force exerted on polystyrene spheres with a ...This paper demonstrates the realization of an optical switch by optically manipulating a large number of polystyrene spheres contained in a capillary. The strong scattering force exerted on polystyrene spheres with a large diameter of 4.3 μm is employed to realize the switching operation. A transparent window is opened for the signal light when the polystyrene spheres originally located at the beam centre are driven out of the beam region by the strong scattering force induced by the control light. The switching dynamics under different incident powers is investigated and compared with that observed in the optical switch based on the formation of optical matter. It is found that a large extinction ratio of - 30 dB and fast switching-on and switching-off times can be achieved in this type of switch.展开更多
This paper systematically investigates the response of colloidal liquids containing magnetic holes of different volume densities to magnetic field by conventional transmission measurements. It finds that the enhanceme...This paper systematically investigates the response of colloidal liquids containing magnetic holes of different volume densities to magnetic field by conventional transmission measurements. It finds that the enhancement in the transmission of such a colloidal liquid under a magnetic field exhibits a strong dependence on the volume density of magnetic holes. A linear increase in the maximum enhancement factor is observed when the volume density of magnetic holes is below a critical level at which a maximum enhancement factor of ~150 is achieved in the near infrared region. Once the volume density of magnetic holes exceeds the critical level, a sharp drop of the maximum enhancement factor to ~2 is observed. After that, the maximum enhancement factor increases gradually till a large volume density of ~9%. By monitoring the arrangement of magnetic holes under a magnetic field, it reveals that the colloidal liquids can be classified into three different phases, i.e., the gas-like, liquid-like and solid-like phases, depending on the volume density of magnetic holes. The response behaviour of colloidal liquids to magnetic field is determined by the interaction between magnetic holes which is governed mainly by their volume density. A phase transition, which is manifested in the dramatic reduction in the maximum enhancement factor, is clearly observed between the liquid-like and solid-like phases. The optical switching operations for colloidal liquids in different phases are compared and the underlying physical mechanisms are discussed.展开更多
We investigate numerically and experimentally the modification of the spontaneous emission rate for micrometersized light sources embedded in a hollow-core photonic crystal fiber （HCPCF）. The diameter of the light s...We investigate numerically and experimentally the modification of the spontaneous emission rate for micrometersized light sources embedded in a hollow-core photonic crystal fiber （HCPCF）. The diameter of the light source is deliberately chosen such that they could be easily introduced into the central hole of the hollow-core photonic crystal fiber by capillary force. The photoluminescence from the microparticles is measured by using an inverted microscope in combination with a spectrometer. The modification of the spontaneous emission rate is observed in a wavelength region where there is no band gap. The experimental observations are consistent with the simulation results obtained by the plane wave expansion and finite-difference time-domain techniques.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant No 10674051)the Program for Innovative Research Team of the Higher Education of Guangdong Province,China (Grant No 06CXTD005)the Key Program of Extracurricular Research in South China Normal University (SCNU),China (Grant No 08GDKC02)
文摘Three-dimensional photonic crystal （PC） heterostructures with high quality are fabricated by using a pressure controlled isothermal heating vertical deposition technique. The formed heterostructures have higher quality, such as deeper band gaps and sharper band edges, than the heterostructures reported so far. Such a significant improvement in quality is due to the introduction of a thin TiO2 buffer layer between the two constitutional PCs. It is revealed that the disorder caused by lattice mismatch is successfully removed if the buffer layer is used once. As a result, the formed heterostructures possess the main features in the band gap of constitutional PCs. The crucial role of the thin buffer layer is also verified by numerical simulations based on the finite-difference time-domain technique.
基金supported by the Natural Science Foundation of Guangdong Province,China(Grant No.2016A030313851)the Provincial Undergraduate Training Program for Innovation and Entrepreneurship of Guangdong Province,China(Grant No.201610574149)
文摘In this paper, an optical radiative cooler with quasi-Cantor structure is theoretically proposed and analyzed. This simple and symmetrically designed optical structure operates upon continuous thermal sources in diurnal subtropical conditions, and its efficiency is much higher than natural cooling, for instance, when operating upon a typical 323.15 K continuous thermal source with a wind speed at 3 m·s^-1, it can generate a net cooling power of 363.68 W·m^-2, which is 18.26% higher than that of non-radiative heat exchange （natural cooling） under the same conditions. Additionally, several aspects are considered in its design to ensure a low cost in application, which is of great economical and environmental significance.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 10974060 and 10774050)the Program for Innovative Research Team of the Higher Education in Guangdong,China (Grant No. 06CXTD005)
文摘This paper demonstrates experimentally and numerically that a significant modification of spontaneous emission rate can be achieved near the surface of a three-dimensional photonic crystal. In experiments, semiconductor coreshell quantum dots are intentionally confined in a thin polymer film on which a three-dimensional colloidal photonic crystal is fabricated. The spontaneous emission rate of quantum dots is characterised by conventional and time-resolved photoluminescence （PL） measurements. The modification of the spontaneous emission rate, which is reflected in the change of spectral shape and PL lifetime, is clearly observed. While an obvious increase in the PL lifetime is found at most wavelengths in the band gap, a significant reduction in the PL lifetime by one order of magnitude is observed at the short-wavelength band edge. Numerical simulation reveals a periodic modulation of spontaneous emission rate with decreasing modulation strength when an emitter is moved away from the surface of the photonic crystal. It is supported by the fact that the modification of spontaneous emission rate is not pronounced for quantum dots distributed in a thick polymer film where both enhancement and suppression are present simultaneously. This finding provides a simple and effective way for improving the performance of light emitting devices.
基金Project supported by the National Natural Science Foundation of China (Grant No 10674051)the Natural Science Foundation of Guangdong province, China (Grant No 06025082)+1 种基金the Program for Innovative Research Team of the Higher Education in Guangdong (Grant No 06CXTD005)the Program for New Century Excellent Talents (NCET) in University of China (Grant No ncet-04-0829)
文摘Application of the pressure controlled isothermal heating vertical deposition method to the fabrication of colloidal photonic crystals is systematically investigated in this paper. The fabricated samples are characterized by scanning electron microscope and transmission spectrum. High-quality samples with large transmissions in the pass bands and the sharp band edges are obtained and the optimum growth condition is determined. For the best sample, the transmission in the pass bands approaches 0.9 while that in the band gap reaches 0.1. More importantly, the maximum differential transmission as high as 0.1/nm is achieved. In addition, it is found that the number of stacking layers does not increase linearly with concentration of PS spheres in a solution, and a gradual saturation occurs when the concentration of PS spheres exceeds 1.5 wt.%. The uniformity of the fabricated samples is examined by transmission measurements on areas with different sizes. Finally, the tolerance of the fabricated samples to baking was studied.
基金Supported by the National Natural Science Foundation of China under Grant Nos 10674051 and 10811120010, and the Program for Innowtive Research Team of the Higher Education in Guangdong under Grant No 06CXTD005.
文摘Three-dimensional optical matters are created by combining the single beam optical trapping with the conventional Z-scan technique. Dynamic light diffraction is employed to evaluate the structure and quality of the optical matter formed at the optimum trapping power. The lattice constant of the optical matter is extracted based on the Bragg and Snell laws, showing that polystyrene spheres are nearly close-packed in the optical matter, confirmed by comparing the diffraction pattern of the optical matter with that of a colloidal photonic crystal fabricated by the self-assembled technique. The relatively broad diffraction peaks observed in the optical matter indicate that the density of disorders in it is higher than that in the photonic crystal. It is suggested that the optical matter possesses a random close-packed structure rather than a face centered cubic one.Three-dimensional optical matters are created by combining the single beam optical trapping with the conven- tional Z-scan technique. Dynamic light diffraction is employed to evaluate the structure and quality of the optical matter formed at the optimum trapping power. The lattice constant of the optical matter is extracted based on the Bragg and Snell laws, showing that polystyrene spheres are nearly close-packed in the optical matter, confirmed by comparing the diffraction pattern of the optical matter with that of a colloidal photonic crystal fabricated by the self-assembled technique. The relatively broad diffraction peaks observed in the optical matter indicate that the density of disorders in it is higher than that in the photonic crystal. It is suggested that the optical matter possesses a random close-packed structure rather than a face centered cubic one.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 10974060 and 10774050 )the Program for Innovative Research Team of the Higher Education of Guangdong Province of China (Grant No. 06CXTD005)
文摘This paper demonstrates the realization of an optical switch by optically manipulating a large number of polystyrene spheres contained in a capillary. The strong scattering force exerted on polystyrene spheres with a large diameter of 4.3 μm is employed to realize the switching operation. A transparent window is opened for the signal light when the polystyrene spheres originally located at the beam centre are driven out of the beam region by the strong scattering force induced by the control light. The switching dynamics under different incident powers is investigated and compared with that observed in the optical switch based on the formation of optical matter. It is found that a large extinction ratio of - 30 dB and fast switching-on and switching-off times can be achieved in this type of switch.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 10974060 and 10774050)the Program for Innovative Research Team of the Higher Education of Guangdong Province of China (Grant No. 06CXTD005)President Foundation of South China Agricultural University (Grant No. 2009K018)
文摘This paper systematically investigates the response of colloidal liquids containing magnetic holes of different volume densities to magnetic field by conventional transmission measurements. It finds that the enhancement in the transmission of such a colloidal liquid under a magnetic field exhibits a strong dependence on the volume density of magnetic holes. A linear increase in the maximum enhancement factor is observed when the volume density of magnetic holes is below a critical level at which a maximum enhancement factor of ~150 is achieved in the near infrared region. Once the volume density of magnetic holes exceeds the critical level, a sharp drop of the maximum enhancement factor to ~2 is observed. After that, the maximum enhancement factor increases gradually till a large volume density of ~9%. By monitoring the arrangement of magnetic holes under a magnetic field, it reveals that the colloidal liquids can be classified into three different phases, i.e., the gas-like, liquid-like and solid-like phases, depending on the volume density of magnetic holes. The response behaviour of colloidal liquids to magnetic field is determined by the interaction between magnetic holes which is governed mainly by their volume density. A phase transition, which is manifested in the dramatic reduction in the maximum enhancement factor, is clearly observed between the liquid-like and solid-like phases. The optical switching operations for colloidal liquids in different phases are compared and the underlying physical mechanisms are discussed.
基金Project supported by the National Natural Science Foundation of China (Grant Nos 10674051 and 10811120010)the Program for Innovative Research Team of the Higher Education of Guangdong, China (Grant No 06CXTD005)
文摘We investigate numerically and experimentally the modification of the spontaneous emission rate for micrometersized light sources embedded in a hollow-core photonic crystal fiber （HCPCF）. The diameter of the light source is deliberately chosen such that they could be easily introduced into the central hole of the hollow-core photonic crystal fiber by capillary force. The photoluminescence from the microparticles is measured by using an inverted microscope in combination with a spectrometer. The modification of the spontaneous emission rate is observed in a wavelength region where there is no band gap. The experimental observations are consistent with the simulation results obtained by the plane wave expansion and finite-difference time-domain techniques.
