The tensile strain in inorganic perovskite films induced by thermal annealing is one of the primary factors contributing to the inefficiency and instability of inorganic perovskite solar cells(IPSCs),which reduces the...The tensile strain in inorganic perovskite films induced by thermal annealing is one of the primary factors contributing to the inefficiency and instability of inorganic perovskite solar cells(IPSCs),which reduces the defect formation energy.Here,a flexible molecule 5-maleimidovaleric acid(5-MVA)was introduced as a strain buffer to release the residual strain of CsPbI_(2.85)Br_(0.15)perovskite.Maleic anhydride and carboxyl groups in 5-MVA interact strongly with the uncoordinated Pb^(2+)through Lewis acid-base reaction,thus tightly“pull”the perovskite lattice.The in-between soft carbon chain increased the structural flexibility of CsPbI_(2.85)Br_(0.15)perovskite materials,which effectively relieved the intrinsic internal strain of CsPbI_(2.85)Br_(0.15),resisted the corrosion of external strain,and also reduced the formation of defects such as VIand Pb0.In addition,the introduction of 5-MVA improved crystal quality,passivated residual defects,and narrowed energy level barriers.Eventually,power conversion efficiency(PCE)of NiOxbased inverted IPSCs increased from 19.25%to 20.82%with the open-circuit voltage enhanced from 1.164 V to 1.230 V.The release of strain also improved the stability of CsPbI_(2.85)Br_(0.15)perovskite films and devices.展开更多
Titanium hydride(TiH_(2)), a promising high-energy additive, is doped into PTFE/Al to optimize the energy output structure of the reactive jet and strive for better aftereffect damage ability to the target. Six types ...Titanium hydride(TiH_(2)), a promising high-energy additive, is doped into PTFE/Al to optimize the energy output structure of the reactive jet and strive for better aftereffect damage ability to the target. Six types of PTFE/Al/TiH_(2) reactive liners with different TiH_(2) content are prepared by the molding and sintering method. The energy release characteristics of PTFE/Al/TiH_(2) reactive jet are tested by the transient explosion energy test, and are characterized from pressure and temperature. The reaction delay time,pressure history, and temperature history of the energy release process are obtained, then the actual value of released energy and reaction efficiency of the reactive jet are calculated. The results show that the peak pressure and temperature of the PTFE/Al/TiH_(2) jet initially increase and then decrease with increasing TiH_(2) content. When the TiH_(2) content is 10%, the actual value of released energy and reaction efficiency increased by 24% and 6.4%, respectively, compared to the PTFE/Al jet. The reaction duration of the reactive material is significantly prolonged as the TiH_(2) content increased from 0% to 30%. Finally,combined with the energy release behaviors of PAT material and the dynamic deformation process of liner, the enhancement mechanism of TiH_(2) on energy release of the reactive jet is expounded.展开更多
Afterburning behind the detonation front of an aluminized explosive releases energy on the millisecond timescale,which prolong the release of detonation energy and the energy release at different stages also shows sig...Afterburning behind the detonation front of an aluminized explosive releases energy on the millisecond timescale,which prolong the release of detonation energy and the energy release at different stages also shows significant differences.However,at present,there are few effective methods for evaluating the energy release characteristics of the middle reaction stage of such explosives,which can have a duration of tens to hundreds of microseconds.The present work demonstrates an approach to assessing the midstage of an aluminized explosive detonation based on a water push test employing a high degree of confinement.In this method,the explosive is contained in a steel cylinder having one end closed that is installed at the bottom of a transparent water tank.Upon detonation,the gaseous products expand in one direction while forcing water ahead of them.The resulting underwater shock wave and the interface between the gas phase products and the water are tracked using an ultra-high-speed framing and streak camera.The shock wave velocity in water and the expansion work performed by the gaseous detonation products were calculated to assess the energy release characteristics of aluminized explosives such as CL-20 and RDX in the middle stage of the detonation reaction.During the middle stage of the detonation process of these aluminized explosives,the aluminum reaction reduced the attenuation of shock waves and increased the work performed by gas phase products.A higher aluminum content increased the energy output while the presence of oxidants slowed the energy release rate.This work demonstrates an effective means of evaluating the performance of aluminized explosives.展开更多
Energetic structural materials(ESMs)are a new type of structural materials with bearing and damage characteristics.In this work the microstructure,mechanical properties and energy release characteristics of multi-elem...Energetic structural materials(ESMs)are a new type of structural materials with bearing and damage characteristics.In this work the microstructure,mechanical properties and energy release characteristics of multi-element Ti-Zr-Ta alloys with good casting performance were studied.The microstructure of the Ti_(x)ZrTa alloys gradually change from BCC+HCP to single BCC structure with the increase of Ti.While the Ti_(2)Zr_(y)Ta alloys was still uniform and single BCC structure with the increase of Zr.The evolution of microstructure and composition then greatly affect the mechanical properties and energy-release characteristics of Ti-Zr-Ta alloys.The synergistic effect of dual phase structure increases the fracture strain of Ti_(x)ZrTa(x=0.2,0.5)with the Ti content decreases,while the fracture strain of Ti_(x)ZrTa(x=2.0,3.0,4.0)gradually increase with the Ti content increases caused by the annihilation of the obstacles for dislocation movement.And as Zr content increases,the fracture strain of Ti_(2)Zr_(y)Ta alloys decrease,then the oxidation reaction rate and fragmentation degree gradually increase.The higher oxidation rate and the lager exposed oxidation area jointly leads the higher releasing energy efficiency of Ti_(x)ZrTa alloys with low Ti content and Ti_(2)Zr_(y)Ta alloys with high Zr content.展开更多
To achieve the controllable release of energy of nitrocellulose-based propellants,this paper combines the cellulose-based nanocomposites aqueous coating(Surelease®-NC)with fluidized bed coating equipment to succe...To achieve the controllable release of energy of nitrocellulose-based propellants,this paper combines the cellulose-based nanocomposites aqueous coating(Surelease®-NC)with fluidized bed coating equipment to successfully prepare the coated spherical propellant for the first time.The effects of fluidized bed coating temperature,air velocity,flow speed and atomization pressure on the adhesion rate,coating integrity and coating uniformity of the coated spherical propellant were investigated,and the preparation of coated spherical propellant with homogeneous size and structural integrity was achieved for the first time.The microscopic morphology,chemical structure,water vapor adsorption behavior,combustion performance,and ageing resistance property of the coated spherical propellant were systematically investigated by,Fourier transforms infrared spectroscopy(FTIR),Micro confocal raman spectrometer,field scanning electron microscopy(SEM),dynamic vapor adsorption techniques,and closed bomb test,confirming the surface core-shell structure and the tightly bonded interfacial structure of coated spherical propellant.Meanwhile,the coated spherical propellant has good hygroscopic,excellent progressive burning and long storage stability.展开更多
We establish a simulation model based on the theory of air flow to analyze the accelerated release effect of the quick release valve inside the air brake control valve.In addition, the combined simulation system of tr...We establish a simulation model based on the theory of air flow to analyze the accelerated release effect of the quick release valve inside the air brake control valve.In addition, the combined simulation system of train air brake system and longitudinal train dynamics is used to analyze how the parameters of the quick release valve in the 120/120–1 brake control valve affect the propagation characteristics of the train brake pipe pressure wave, the release action range of the accelerated brake, and the longitudinal coupler force for a 20,000-ton heavy haul train on the section of the Datong–Qinhuangdao Railway. The results show that the quick release valve can effectively accelerate the rising speed of the train brake pipe pressure during the initial release, as the accelerated release effect is evident before the train brake pipe pressure reaches582 k Pa. The quick release valve can effectively accelerate the release of the rear cars, reducing the longitudinal coupler force impact due to time delay of the release process. The quick release valve can effectively reduce the tensile coupler force in the train by as much as 20% in certain cases.展开更多
The fertiliser industry faces a continuing challenge to improve the efficiency of their products,particularly of nitrogenous fertilisers,and to minimise adverse impacts.Therefore,a new slow release fertilizer,ureaimpr...The fertiliser industry faces a continuing challenge to improve the efficiency of their products,particularly of nitrogenous fertilisers,and to minimise adverse impacts.Therefore,a new slow release fertilizer,ureaimpregnated woodchips from tropical plant biomass(oil palm frond and rubberwood),was developed.The morphology of the impregnated woodchips was investigated by scanning electron microscopy and the success of impregnation of urea and nitrogen deposition into the woodchips was confirmed by energy dispersive X-ray spectrometry.When nitrogen release patterns from impregnated woodchips fertiliser were simulated using a soil solution and distilled water as leaching solutions in a static condition for 768 h,release was slow and steady,although the release rate was lower in distilled water than in the soil solution.展开更多
^(14)C-butachlor and ^(14)C-oxadiazon could be released from four kinds of CR formulations into water respectively, and the release percentage of each herbicide increased with time, which could be expressed by regress...^(14)C-butachlor and ^(14)C-oxadiazon could be released from four kinds of CR formulations into water respectively, and the release percentage of each herbicide increased with time, which could be expressed by regression equations (very obvious positive relationship). The release percentages of ^(14)C-herbicides from CR formulations were related to herbicide CR formulation and water type. Total recovery including ^(14)C-released and ^(14)C-left in formulations for each ^(14)C-herbicide was high at the 56th day after treatment. Some of the released ^(14)C-butachlor in water could be hydrolysed although under dark condition. The rate of hydrolysis was influenced by water type and formulations.展开更多
The productivity of Robinia pseudoacacia（R.p.） pure forest usually declines at the late growth stage,and reforming it into mixed forests could be a promising way to resolve this problem. When choosing a suitable tre...The productivity of Robinia pseudoacacia（R.p.） pure forest usually declines at the late growth stage,and reforming it into mixed forests could be a promising way to resolve this problem. When choosing a suitable tree species that can be mixed with R.p., the interspecific relationship is an important issue. Therefore, we gathered the autumn litter fall from R.p. and 10 other species from the Loess Plateau of China were mixed in dual species litterbags（R.p.＋each other species） and buried them in soil for a 345 days lab decay incubation. We measured the litter mass loss and nutrient contents to determine whether the nutrient release was affected by mixed species litter decomposition. The impacts of mixed litter decomposition on macro-elements release were more obvious than on micro-elements. The litters with similar substrate quality might show variable impacts on nutrients release in mixed decomposition. The C loss and release of nutrient was improved by descending order when R.p. litter was mixed with Hippophae rhamnoides, Ulmus pumila, Populus simonii, Larix principis-rupprechtii and Quercus liaotungensis（Q.l.）. But, except for Q.l., only the other species were recommended as suitable mix-plants for R.p. since promoting a high turnover of the nutrient in the litter compartment and a rapid availability for tree.展开更多
The dynamics of litter nitrogen (N) and phosphorus (P) release could be affected by soil fauna and environmental conditions. The objective of the present study was to investigate the effects of soil fauna on the dynam...The dynamics of litter nitrogen (N) and phosphorus (P) release could be affected by soil fauna and environmental conditions. The objective of the present study was to investigate the effects of soil fauna on the dynamics of N and P during foliar litter decomposition in three types of ecosystems (i.e., montane forest, ecotone, and dry valley) along an elevation gradient. A field experiment using litterbags with two different mesh sizes (0.04 and 3 mm) was conducted from November 2013 to October 2014. Nitrogen and P release rates in decomposing foliar litter from fir (Abies faxoniana) and birch (Betula albosinensis) in montane forest, oak (Quercus baronii) and cypress (Cupressus chengiana) in ecotone, and cypress and clovershrub (Campylotropis macrocarpa) in dry valley were investigated in the upper reaches of the Yangtze River. Soil fauna strongly affected N and P release across different decomposition periods and ecosystem types. The average release rate of N mediated by soil fauna across the entire year was higher in the dry valley (15.6–37.3%) than in the montane forest (0.5–6.4%) and the ecotone (- 3.7–4.9%). The effects of soil fauna on P release rate were manifest in both the montane forest and the dry valley. Moreover, the impacts of soil fauna can vary substantially among different decomposition periods. Our results indicated that soil fauna can significantly affect N and P release during litter decomposition. The N release rate mediated by fauna was likely to be more sensitive to the effects of plant species (i.e., initial litter chemical traits), while the P release rate mediated by soil fauna might be subject to the effects of local-scale environmental factors (e.g., temperature) to a greater extent.展开更多
Reactive Materials(RMs),a new material with structural and energy release characteristics under shockinduced chemical reactions,are promising in extensive applications in national defense and military fields.They can ...Reactive Materials(RMs),a new material with structural and energy release characteristics under shockinduced chemical reactions,are promising in extensive applications in national defense and military fields.They can increase the lethality of warheads due to their dual functionality.This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading.Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs,temperature distribution,peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material(RM)warhead casings by using high-speed camera,infrared thermal imager temperature and peak overpressure testing and scanning electron microscope.Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings.The RM casings can improve the peak overpressure of the air shock wave under explosion loading,though the results are different with different charge ratios.According to the energy release characteristics of the RM,increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave,while reducing the thickness will increase the peak overpressure of the far-field air shock wave.展开更多
Quantifying the rockburst consequence is of critical importance to reduce the hazards with preventative measures in underground mines and deep tunnels. Contours of energy components within a pillar model are plotted a...Quantifying the rockburst consequence is of critical importance to reduce the hazards with preventative measures in underground mines and deep tunnels. Contours of energy components within a pillar model are plotted at different rockmass damage stages, and plastic strain work and released energy are proposed as indicators of rockmass damage consequence. One pillar model under different loading stiffness is simulated to assess indicators of pillar burst and the resulting damages. The results show the rockmass damage under soft loading stiffness has larger magnitude of plastic strain work and released energy than that which is under stiff loading stiffness, indicating the rockburst consequence can be quantified with plastic strain work and released energy in numerical models. With the quantified rockburst consequence,preventative measures can be taken to avoid severe hazards to mine safety.展开更多
In the process of mining coalbed methane(CBM),an unsteady state often arises due to the rapid extraction,release and pressure relief of CBM.In this case,the effective stress of coal changes dynamically,affecting the s...In the process of mining coalbed methane(CBM),an unsteady state often arises due to the rapid extraction,release and pressure relief of CBM.In this case,the effective stress of coal changes dynamically,affecting the stability of the gassy coal seam.In this paper,gas release tests of gassy coal under conventional triaxial compression were performed,and the dynamic effective stress(DES)during gas release was obtained indirectly based on a constitutive equation and deformation of coal.The results show that the maximum increases in DES caused by the release of free gas and adsorbed gas under the stress of 1.1 MPa were 0.811 and 5.418 MPa,respectively,which seriously affected the stress state of the coal.During the gas release,the free gas pressure and the adsorbed gas volume were the parameters that directly affected the DES and showed a positive linear relationship with the DES with an intercept of zero.The DES of the coal sample increased exponentially with time,which was determined by the contents of free and adsorbed gas.Based on the experimental results and theoretical analysis,an effective stress model was obtained for loaded gassy coal during gas release.The results of verification indicated accuracy greater than 99%.展开更多
Coal and gas outburst is a violent disaster driven by released energy from gas desorption.The initial expansion energy of released gas(IEERG)is a new method to predict coal and gas outburst.In this paper,an instrument...Coal and gas outburst is a violent disaster driven by released energy from gas desorption.The initial expansion energy of released gas(IEERG)is a new method to predict coal and gas outburst.In this paper,an instrument for IEERG measurement was developed.Compared with previous setups,the new one which is equipped with three convergent nozzles and quick-release mechanism gets improved in data acquisition and gas sealing and releasing performance.To comprehensively know the effect of gas pressure,particle size,and nozzle area on IEERG,a series of experiments were carried out with this new setup.The variable control test results indicated that the gas pressure-IEERG curves remain the linear trend and the particle size-IEERG curves maintain the negative exponential trend for nozzle areas at 1.13,2.26,and3.39 mm2,respectively.The increase in nozzle area leads to deceases in value of IEERG and absolute value of slope of fitting curves in each test.In addition,the orthogonal experiment showed that the influence of gas pressure,nozzle area,and particle size on IEERG decreases in turn.Only gas pressure had a marked impact on IEERG.This work offers great importance in improving the accuracy of prediction of coal and gas outburst.展开更多
Enhancement release has been proven effective in natural resources recovery of Chinese shrimp Fenneropenaeus chinensis in the last several decades in China, however, to assess the effectiveness of enhancement release,...Enhancement release has been proven effective in natural resources recovery of Chinese shrimp Fenneropenaeus chinensis in the last several decades in China, however, to assess the effectiveness of enhancement release, we still need to develop a high-efficient and easy-operational method to replace those physical-tagging release method with labor intensive, size-and number-limited. In the present study, single(with maternal known) parentage identification using eight simple sequence repeat(SSR) markers genotype fingerprint was used to trace Chinese shrimp released in Bohai Bay in 2013. A total of 884 shrimp spawners were collected from two hatcheries in Tianjin City respectively after enhancement release of shrimp larvae in May 2013. A total of 844 shrimp samples were recaptured around the release location approximately 4 months after the shrimp larvae were released into the natural sea. Genotype data of 8 SSR loci of the 1,726 samples were used for maternal-offspring parentage identification using CEervus 3.0 software. The allele number in each locus ranged from 8 to 68 with an average value of 33.25, which produced the cumulative exclusion probability with one parent known of all these sight loci up to 99%. Among the 844 recaptured shrimp samples, 448(♂:♀=212:232, gender information was lost for 4 samples) were successfully traced to their 337 maternal parents using a logarithm of odds(LOD) > 3.0 threshold. Among these 337 maternal parents, 253 had a single offspring, 62 had two offspring, 18 had three offspring, 3 had four offspring, and 1 had five offspring. For the first time, a large number of released shrimp were identified from recapture samples, and this study showed that it is possible to trace all released Chinese shrimp without using any type of physical tag in enhancement release activities. This not only means more precise recapture ratio assessment than ever expected, but also this method demonstrates an effective method for large-scale hatchery release as well as for organisms used in hatchery enhancement which are not suitable for physical tagging.展开更多
The stress path characteristics of surrounding rock in the formation of gob were analyzed and the unloading was solved. Taking Chengchao Iron Mine as the engineering background, the model for analyzing the instability...The stress path characteristics of surrounding rock in the formation of gob were analyzed and the unloading was solved. Taking Chengchao Iron Mine as the engineering background, the model for analyzing the instability of deep gob was established based on the mechanism of stress relief in deep mining.The energy evolution law was analyzed by introducing the local energy release rate index(LERR), and the energy criterion of the instability of surrounding rock was established based on the cusp catastrophe theory. The results show that the evolution equation of the local energy release of the surrounding rock is a quartic function with one unknown and the release rate increases gradually during the mining process.The calculation results show that the gob is stable. The LERR per unit volume of the bottom structure is relatively smaller which means that the stability is better. The LERR distribution showed that there was main energy release in the horizontal direction and energy concentration in the vertical direction which meets the characteristics of deep mining. In summary, this model could effectively calculate the stability of surrounding rock in the formation of gob. The LERR could reflect the dynamic process of energy release,transfer and dissipation and that provided an important reference for the study of the stability of deep mined out area.展开更多
We investigated decomposition and nutrient release patterns of leaf and sheath litter of two important highland bamboo species （viz. Phyllostachys bambusoides Sieb. （Zucc.） and Arundinaria racemosa Munro） by using...We investigated decomposition and nutrient release patterns of leaf and sheath litter of two important highland bamboo species （viz. Phyllostachys bambusoides Sieb. （Zucc.） and Arundinaria racemosa Munro） by using a litter bag technique. Our objective was to improve understanding of the addition of organic matter and nutrients to soil from the litter of two abundant highland bamboo species, species that support the local population of the region in many ways. N concentration and N/P ratio were significantly higher （p〈0.01） in leaf litter of P bambusoides. Significantly, larger values of lignin concentration, C/N ratio, and lignin/N ratio were found in the sheath litter ofA racemosa. Weight loss of both leaf and sheath litter was strongly positively correlated with N and N/P ratio, and significantly negatively correlated 6o〈0.01） with C/N ratio. Lignin/N had a negative correlation with decay rate. In both species, only lignin concentration of the litter showed strong positive correlation with N release. Litter decomposition and N release patterns were similar for the two bamboo species, whereas, P release rate from leaf litter was higher in P bambusoides and differed significantly between sheath and leaf litter for both species. The complex pattern of nutrient release through mineralization and immobilization during litter decomposition ensures nutrient availability in both managed and natural bamboo stands subjected to anthropogenic disturbances.展开更多
Health monitoring data or the data about infectious diseases such as COVID-19 may need to be constantly updated and dynamically released,but they may contain user's sensitive information.Thus,how to preserve the u...Health monitoring data or the data about infectious diseases such as COVID-19 may need to be constantly updated and dynamically released,but they may contain user's sensitive information.Thus,how to preserve the user's privacy before their release is critically important yet challenging.Differential Privacy(DP)is well-known to provide effective privacy protection,and thus the dynamic DP preserving data release was designed to publish a histogram to meet DP guarantee.Unfortunately,this scheme may result in high cumulative errors and lower the data availability.To address this problem,in this paper,we apply Jensen-Shannon(JS)divergence to design the OPTICS(Ordering Points To Identify The Clustering Structure)scheme.It uses JS divergence to measure the difference between the updated data set at the current release time and private data set at the previous release time.By comparing the difference with a threshold,only when the difference is greater than the threshold,can we apply OPTICS to publish DP protected data sets.Our experimental results show that the absolute errors and average relative errors are significantly lower than those existing works.展开更多
Stimuli-triggered drug delivery systems hold vast promise in local infection treatment for the site-specific targeting and shuttling of drugs.Herein,chitosan conjugates(SPCS)installed with sialic acid(SA)and phenylbor...Stimuli-triggered drug delivery systems hold vast promise in local infection treatment for the site-specific targeting and shuttling of drugs.Herein,chitosan conjugates(SPCS)installed with sialic acid(SA)and phenylboronic acid(PBA)were synthesized,of which SA served as targeting ligand for coccidium and reversible-binding bridge for PBA.The enhanced drug-loading capacity of SPCS micelles was attributed to a combination assembly from hydrophobicity-driving and reversible borate bridges.The drug-loaded SPCS micelles shared superior biostability in upper gastrointestinal tract.After reaching the lesions,the borate bridges were snipped by carbohydrates under a higher pH followed by accelerated drug release,while SA exposure on micellar surface facilitated drug cellular internalization to eliminate parasites inside.The drugmicelles revealed an enhanced anti-coccidial capacity with a higher index of 185.72 compared with commercial preparation.The dual-responsive combination of physicochemical assembly could provide an efficient strategy for the exploitation of stable,safe and flexible anti-infectious drug delivery systems.展开更多
基金financial support of National Key Research and Development Program of China(Grant No.2022YFB04200302)joint funds of National Natural Science Foundation of China(Grant No.62104115)+5 种基金National Natural Science Foundation of China(Grant No.U21A2072)Overseas Expertise Introduction Project for Discipline Innovation of Higher Education of China(Grant No.B16027)Key R&D Program of Hebei Province(No.19214301D)Yunnan Provincial Science and Technology Project at Southwest United Graduate School(No.202302A0370009)Haihe Laboratory of Sustainable Chemical TransformationsFundamental Research Funds for the Central Universities,Nankai University。
文摘The tensile strain in inorganic perovskite films induced by thermal annealing is one of the primary factors contributing to the inefficiency and instability of inorganic perovskite solar cells(IPSCs),which reduces the defect formation energy.Here,a flexible molecule 5-maleimidovaleric acid(5-MVA)was introduced as a strain buffer to release the residual strain of CsPbI_(2.85)Br_(0.15)perovskite.Maleic anhydride and carboxyl groups in 5-MVA interact strongly with the uncoordinated Pb^(2+)through Lewis acid-base reaction,thus tightly“pull”the perovskite lattice.The in-between soft carbon chain increased the structural flexibility of CsPbI_(2.85)Br_(0.15)perovskite materials,which effectively relieved the intrinsic internal strain of CsPbI_(2.85)Br_(0.15),resisted the corrosion of external strain,and also reduced the formation of defects such as VIand Pb0.In addition,the introduction of 5-MVA improved crystal quality,passivated residual defects,and narrowed energy level barriers.Eventually,power conversion efficiency(PCE)of NiOxbased inverted IPSCs increased from 19.25%to 20.82%with the open-circuit voltage enhanced from 1.164 V to 1.230 V.The release of strain also improved the stability of CsPbI_(2.85)Br_(0.15)perovskite films and devices.
基金National Natural Science Foundation of China (Grant No. 12002045)State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology (QNKT22-09) to provide fund for conducting experiments。
文摘Titanium hydride(TiH_(2)), a promising high-energy additive, is doped into PTFE/Al to optimize the energy output structure of the reactive jet and strive for better aftereffect damage ability to the target. Six types of PTFE/Al/TiH_(2) reactive liners with different TiH_(2) content are prepared by the molding and sintering method. The energy release characteristics of PTFE/Al/TiH_(2) reactive jet are tested by the transient explosion energy test, and are characterized from pressure and temperature. The reaction delay time,pressure history, and temperature history of the energy release process are obtained, then the actual value of released energy and reaction efficiency of the reactive jet are calculated. The results show that the peak pressure and temperature of the PTFE/Al/TiH_(2) jet initially increase and then decrease with increasing TiH_(2) content. When the TiH_(2) content is 10%, the actual value of released energy and reaction efficiency increased by 24% and 6.4%, respectively, compared to the PTFE/Al jet. The reaction duration of the reactive material is significantly prolonged as the TiH_(2) content increased from 0% to 30%. Finally,combined with the energy release behaviors of PAT material and the dynamic deformation process of liner, the enhancement mechanism of TiH_(2) on energy release of the reactive jet is expounded.
基金supported by the National Natural Science Foundation of China(Grant No.11832006)。
文摘Afterburning behind the detonation front of an aluminized explosive releases energy on the millisecond timescale,which prolong the release of detonation energy and the energy release at different stages also shows significant differences.However,at present,there are few effective methods for evaluating the energy release characteristics of the middle reaction stage of such explosives,which can have a duration of tens to hundreds of microseconds.The present work demonstrates an approach to assessing the midstage of an aluminized explosive detonation based on a water push test employing a high degree of confinement.In this method,the explosive is contained in a steel cylinder having one end closed that is installed at the bottom of a transparent water tank.Upon detonation,the gaseous products expand in one direction while forcing water ahead of them.The resulting underwater shock wave and the interface between the gas phase products and the water are tracked using an ultra-high-speed framing and streak camera.The shock wave velocity in water and the expansion work performed by the gaseous detonation products were calculated to assess the energy release characteristics of aluminized explosives such as CL-20 and RDX in the middle stage of the detonation reaction.During the middle stage of the detonation process of these aluminized explosives,the aluminum reaction reduced the attenuation of shock waves and increased the work performed by gas phase products.A higher aluminum content increased the energy output while the presence of oxidants slowed the energy release rate.This work demonstrates an effective means of evaluating the performance of aluminized explosives.
基金supported by the National Natural Science Foundation of China(Grant Nos.52171166,11972372 and U20A20231)supported by Sinoma Institute of Materials Research(Guang Zhou)Co.,Ltd。
文摘Energetic structural materials(ESMs)are a new type of structural materials with bearing and damage characteristics.In this work the microstructure,mechanical properties and energy release characteristics of multi-element Ti-Zr-Ta alloys with good casting performance were studied.The microstructure of the Ti_(x)ZrTa alloys gradually change from BCC+HCP to single BCC structure with the increase of Ti.While the Ti_(2)Zr_(y)Ta alloys was still uniform and single BCC structure with the increase of Zr.The evolution of microstructure and composition then greatly affect the mechanical properties and energy-release characteristics of Ti-Zr-Ta alloys.The synergistic effect of dual phase structure increases the fracture strain of Ti_(x)ZrTa(x=0.2,0.5)with the Ti content decreases,while the fracture strain of Ti_(x)ZrTa(x=2.0,3.0,4.0)gradually increase with the Ti content increases caused by the annihilation of the obstacles for dislocation movement.And as Zr content increases,the fracture strain of Ti_(2)Zr_(y)Ta alloys decrease,then the oxidation reaction rate and fragmentation degree gradually increase.The higher oxidation rate and the lager exposed oxidation area jointly leads the higher releasing energy efficiency of Ti_(x)ZrTa alloys with low Ti content and Ti_(2)Zr_(y)Ta alloys with high Zr content.
基金supported by the National Natural Science Foundation of China (Grant No.22005143)Young Elite Scientists Sponsorship Program by CAST (Grant No.2022QNRC001)。
文摘To achieve the controllable release of energy of nitrocellulose-based propellants,this paper combines the cellulose-based nanocomposites aqueous coating(Surelease®-NC)with fluidized bed coating equipment to successfully prepare the coated spherical propellant for the first time.The effects of fluidized bed coating temperature,air velocity,flow speed and atomization pressure on the adhesion rate,coating integrity and coating uniformity of the coated spherical propellant were investigated,and the preparation of coated spherical propellant with homogeneous size and structural integrity was achieved for the first time.The microscopic morphology,chemical structure,water vapor adsorption behavior,combustion performance,and ageing resistance property of the coated spherical propellant were systematically investigated by,Fourier transforms infrared spectroscopy(FTIR),Micro confocal raman spectrometer,field scanning electron microscopy(SEM),dynamic vapor adsorption techniques,and closed bomb test,confirming the surface core-shell structure and the tightly bonded interfacial structure of coated spherical propellant.Meanwhile,the coated spherical propellant has good hygroscopic,excellent progressive burning and long storage stability.
基金China National Railway Group Co.,Ltd(N2020J037).
文摘We establish a simulation model based on the theory of air flow to analyze the accelerated release effect of the quick release valve inside the air brake control valve.In addition, the combined simulation system of train air brake system and longitudinal train dynamics is used to analyze how the parameters of the quick release valve in the 120/120–1 brake control valve affect the propagation characteristics of the train brake pipe pressure wave, the release action range of the accelerated brake, and the longitudinal coupler force for a 20,000-ton heavy haul train on the section of the Datong–Qinhuangdao Railway. The results show that the quick release valve can effectively accelerate the rising speed of the train brake pipe pressure during the initial release, as the accelerated release effect is evident before the train brake pipe pressure reaches582 k Pa. The quick release valve can effectively accelerate the release of the rear cars, reducing the longitudinal coupler force impact due to time delay of the release process. The quick release valve can effectively reduce the tensile coupler force in the train by as much as 20% in certain cases.
基金supported by Research University Grant Scheme(RUGS)University Putra Malaysia(No.03-02-12-2293RU)
文摘The fertiliser industry faces a continuing challenge to improve the efficiency of their products,particularly of nitrogenous fertilisers,and to minimise adverse impacts.Therefore,a new slow release fertilizer,ureaimpregnated woodchips from tropical plant biomass(oil palm frond and rubberwood),was developed.The morphology of the impregnated woodchips was investigated by scanning electron microscopy and the success of impregnation of urea and nitrogen deposition into the woodchips was confirmed by energy dispersive X-ray spectrometry.When nitrogen release patterns from impregnated woodchips fertiliser were simulated using a soil solution and distilled water as leaching solutions in a static condition for 768 h,release was slow and steady,although the release rate was lower in distilled water than in the soil solution.
文摘^(14)C-butachlor and ^(14)C-oxadiazon could be released from four kinds of CR formulations into water respectively, and the release percentage of each herbicide increased with time, which could be expressed by regression equations (very obvious positive relationship). The release percentages of ^(14)C-herbicides from CR formulations were related to herbicide CR formulation and water type. Total recovery including ^(14)C-released and ^(14)C-left in formulations for each ^(14)C-herbicide was high at the 56th day after treatment. Some of the released ^(14)C-butachlor in water could be hydrolysed although under dark condition. The rate of hydrolysis was influenced by water type and formulations.
基金supported by the National Science Foundation of China (No. 31070630)
文摘The productivity of Robinia pseudoacacia（R.p.） pure forest usually declines at the late growth stage,and reforming it into mixed forests could be a promising way to resolve this problem. When choosing a suitable tree species that can be mixed with R.p., the interspecific relationship is an important issue. Therefore, we gathered the autumn litter fall from R.p. and 10 other species from the Loess Plateau of China were mixed in dual species litterbags（R.p.＋each other species） and buried them in soil for a 345 days lab decay incubation. We measured the litter mass loss and nutrient contents to determine whether the nutrient release was affected by mixed species litter decomposition. The impacts of mixed litter decomposition on macro-elements release were more obvious than on micro-elements. The litters with similar substrate quality might show variable impacts on nutrients release in mixed decomposition. The C loss and release of nutrient was improved by descending order when R.p. litter was mixed with Hippophae rhamnoides, Ulmus pumila, Populus simonii, Larix principis-rupprechtii and Quercus liaotungensis（Q.l.）. But, except for Q.l., only the other species were recommended as suitable mix-plants for R.p. since promoting a high turnover of the nutrient in the litter compartment and a rapid availability for tree.
基金financially supported by the National Natural Science Foundation of China(31670526,31622018,31570445 and 31500509)the Doctoral Scientific Fund Project of the Ministry of Education of China(20135103110002)
文摘The dynamics of litter nitrogen (N) and phosphorus (P) release could be affected by soil fauna and environmental conditions. The objective of the present study was to investigate the effects of soil fauna on the dynamics of N and P during foliar litter decomposition in three types of ecosystems (i.e., montane forest, ecotone, and dry valley) along an elevation gradient. A field experiment using litterbags with two different mesh sizes (0.04 and 3 mm) was conducted from November 2013 to October 2014. Nitrogen and P release rates in decomposing foliar litter from fir (Abies faxoniana) and birch (Betula albosinensis) in montane forest, oak (Quercus baronii) and cypress (Cupressus chengiana) in ecotone, and cypress and clovershrub (Campylotropis macrocarpa) in dry valley were investigated in the upper reaches of the Yangtze River. Soil fauna strongly affected N and P release across different decomposition periods and ecosystem types. The average release rate of N mediated by soil fauna across the entire year was higher in the dry valley (15.6–37.3%) than in the montane forest (0.5–6.4%) and the ecotone (- 3.7–4.9%). The effects of soil fauna on P release rate were manifest in both the montane forest and the dry valley. Moreover, the impacts of soil fauna can vary substantially among different decomposition periods. Our results indicated that soil fauna can significantly affect N and P release during litter decomposition. The N release rate mediated by fauna was likely to be more sensitive to the effects of plant species (i.e., initial litter chemical traits), while the P release rate mediated by soil fauna might be subject to the effects of local-scale environmental factors (e.g., temperature) to a greater extent.
基金the Fundamental Research Funds for the Central Universities(No.30920021108)Open Foundation of Hypervelocity Impact Research Center of CARDC(20200106).
文摘Reactive Materials(RMs),a new material with structural and energy release characteristics under shockinduced chemical reactions,are promising in extensive applications in national defense and military fields.They can increase the lethality of warheads due to their dual functionality.This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading.Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs,temperature distribution,peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material(RM)warhead casings by using high-speed camera,infrared thermal imager temperature and peak overpressure testing and scanning electron microscope.Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings.The RM casings can improve the peak overpressure of the air shock wave under explosion loading,though the results are different with different charge ratios.According to the energy release characteristics of the RM,increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave,while reducing the thickness will increase the peak overpressure of the far-field air shock wave.
基金funded by the National Institute of Occupational Health and Science (NIOSH) under Grant Number 200-2016-90154
文摘Quantifying the rockburst consequence is of critical importance to reduce the hazards with preventative measures in underground mines and deep tunnels. Contours of energy components within a pillar model are plotted at different rockmass damage stages, and plastic strain work and released energy are proposed as indicators of rockmass damage consequence. One pillar model under different loading stiffness is simulated to assess indicators of pillar burst and the resulting damages. The results show the rockmass damage under soft loading stiffness has larger magnitude of plastic strain work and released energy than that which is under stiff loading stiffness, indicating the rockburst consequence can be quantified with plastic strain work and released energy in numerical models. With the quantified rockburst consequence,preventative measures can be taken to avoid severe hazards to mine safety.
基金This research was funded by the National Natural Science Foundation of China(No.52174081)the China Postdoctoral Science Foundation(No.2021M702001)+1 种基金the Postdoctoral Innovation Project of Shandong Province(No.202102002)the Natural Science Foundation of Shandong Province(No.2019GSF111036).
文摘In the process of mining coalbed methane(CBM),an unsteady state often arises due to the rapid extraction,release and pressure relief of CBM.In this case,the effective stress of coal changes dynamically,affecting the stability of the gassy coal seam.In this paper,gas release tests of gassy coal under conventional triaxial compression were performed,and the dynamic effective stress(DES)during gas release was obtained indirectly based on a constitutive equation and deformation of coal.The results show that the maximum increases in DES caused by the release of free gas and adsorbed gas under the stress of 1.1 MPa were 0.811 and 5.418 MPa,respectively,which seriously affected the stress state of the coal.During the gas release,the free gas pressure and the adsorbed gas volume were the parameters that directly affected the DES and showed a positive linear relationship with the DES with an intercept of zero.The DES of the coal sample increased exponentially with time,which was determined by the contents of free and adsorbed gas.Based on the experimental results and theoretical analysis,an effective stress model was obtained for loaded gassy coal during gas release.The results of verification indicated accuracy greater than 99%.
基金supported by the National Key Scientific Instruments and Equipment Development Projects of China(No.51427804)the National Science Foundation of Shandong Province(No.ZR2017MEE023)。
文摘Coal and gas outburst is a violent disaster driven by released energy from gas desorption.The initial expansion energy of released gas(IEERG)is a new method to predict coal and gas outburst.In this paper,an instrument for IEERG measurement was developed.Compared with previous setups,the new one which is equipped with three convergent nozzles and quick-release mechanism gets improved in data acquisition and gas sealing and releasing performance.To comprehensively know the effect of gas pressure,particle size,and nozzle area on IEERG,a series of experiments were carried out with this new setup.The variable control test results indicated that the gas pressure-IEERG curves remain the linear trend and the particle size-IEERG curves maintain the negative exponential trend for nozzle areas at 1.13,2.26,and3.39 mm2,respectively.The increase in nozzle area leads to deceases in value of IEERG and absolute value of slope of fitting curves in each test.In addition,the orthogonal experiment showed that the influence of gas pressure,nozzle area,and particle size on IEERG decreases in turn.Only gas pressure had a marked impact on IEERG.This work offers great importance in improving the accuracy of prediction of coal and gas outburst.
基金This work was supported by National Basic Research Program of China(973 Program)(2015CB453303)and International Science and Technology Cooperation Program of China(2013DFA31410)
文摘Enhancement release has been proven effective in natural resources recovery of Chinese shrimp Fenneropenaeus chinensis in the last several decades in China, however, to assess the effectiveness of enhancement release, we still need to develop a high-efficient and easy-operational method to replace those physical-tagging release method with labor intensive, size-and number-limited. In the present study, single(with maternal known) parentage identification using eight simple sequence repeat(SSR) markers genotype fingerprint was used to trace Chinese shrimp released in Bohai Bay in 2013. A total of 884 shrimp spawners were collected from two hatcheries in Tianjin City respectively after enhancement release of shrimp larvae in May 2013. A total of 844 shrimp samples were recaptured around the release location approximately 4 months after the shrimp larvae were released into the natural sea. Genotype data of 8 SSR loci of the 1,726 samples were used for maternal-offspring parentage identification using CEervus 3.0 software. The allele number in each locus ranged from 8 to 68 with an average value of 33.25, which produced the cumulative exclusion probability with one parent known of all these sight loci up to 99%. Among the 844 recaptured shrimp samples, 448(♂:♀=212:232, gender information was lost for 4 samples) were successfully traced to their 337 maternal parents using a logarithm of odds(LOD) > 3.0 threshold. Among these 337 maternal parents, 253 had a single offspring, 62 had two offspring, 18 had three offspring, 3 had four offspring, and 1 had five offspring. For the first time, a large number of released shrimp were identified from recapture samples, and this study showed that it is possible to trace all released Chinese shrimp without using any type of physical tag in enhancement release activities. This not only means more precise recapture ratio assessment than ever expected, but also this method demonstrates an effective method for large-scale hatchery release as well as for organisms used in hatchery enhancement which are not suitable for physical tagging.
基金provided by the National Natural Science Foundation of China(No.5137403)the Fundamental Research Funds for the Central Universities(No.FRF-TP-15-042A1)
文摘The stress path characteristics of surrounding rock in the formation of gob were analyzed and the unloading was solved. Taking Chengchao Iron Mine as the engineering background, the model for analyzing the instability of deep gob was established based on the mechanism of stress relief in deep mining.The energy evolution law was analyzed by introducing the local energy release rate index(LERR), and the energy criterion of the instability of surrounding rock was established based on the cusp catastrophe theory. The results show that the evolution equation of the local energy release of the surrounding rock is a quartic function with one unknown and the release rate increases gradually during the mining process.The calculation results show that the gob is stable. The LERR per unit volume of the bottom structure is relatively smaller which means that the stability is better. The LERR distribution showed that there was main energy release in the horizontal direction and energy concentration in the vertical direction which meets the characteristics of deep mining. In summary, this model could effectively calculate the stability of surrounding rock in the formation of gob. The LERR could reflect the dynamic process of energy release,transfer and dissipation and that provided an important reference for the study of the stability of deep mined out area.
文摘We investigated decomposition and nutrient release patterns of leaf and sheath litter of two important highland bamboo species （viz. Phyllostachys bambusoides Sieb. （Zucc.） and Arundinaria racemosa Munro） by using a litter bag technique. Our objective was to improve understanding of the addition of organic matter and nutrients to soil from the litter of two abundant highland bamboo species, species that support the local population of the region in many ways. N concentration and N/P ratio were significantly higher （p〈0.01） in leaf litter of P bambusoides. Significantly, larger values of lignin concentration, C/N ratio, and lignin/N ratio were found in the sheath litter ofA racemosa. Weight loss of both leaf and sheath litter was strongly positively correlated with N and N/P ratio, and significantly negatively correlated 6o〈0.01） with C/N ratio. Lignin/N had a negative correlation with decay rate. In both species, only lignin concentration of the litter showed strong positive correlation with N release. Litter decomposition and N release patterns were similar for the two bamboo species, whereas, P release rate from leaf litter was higher in P bambusoides and differed significantly between sheath and leaf litter for both species. The complex pattern of nutrient release through mineralization and immobilization during litter decomposition ensures nutrient availability in both managed and natural bamboo stands subjected to anthropogenic disturbances.
基金supported in part by National Natural Science Foundation of China(No.61672106)in part by Natural Science Foundation of Beijing,China(L192023)in part by the project of promoting the Classified Development of Beijing Information Science and Technology University(No.5112211038,5112211039)。
文摘Health monitoring data or the data about infectious diseases such as COVID-19 may need to be constantly updated and dynamically released,but they may contain user's sensitive information.Thus,how to preserve the user's privacy before their release is critically important yet challenging.Differential Privacy(DP)is well-known to provide effective privacy protection,and thus the dynamic DP preserving data release was designed to publish a histogram to meet DP guarantee.Unfortunately,this scheme may result in high cumulative errors and lower the data availability.To address this problem,in this paper,we apply Jensen-Shannon(JS)divergence to design the OPTICS(Ordering Points To Identify The Clustering Structure)scheme.It uses JS divergence to measure the difference between the updated data set at the current release time and private data set at the previous release time.By comparing the difference with a threshold,only when the difference is greater than the threshold,can we apply OPTICS to publish DP protected data sets.Our experimental results show that the absolute errors and average relative errors are significantly lower than those existing works.
基金financial support from National Key Research and Development Program(2017YFD0501403)National Natural Science Foundation of China(Nos.81872819)+4 种基金Natural Science Foundation of Jiangsu Province(No.BK20171390)supported by Double First-Rate construction plan of China Pharmaceutical University(CPU2018GY26)the Project of State Key Laboratory of Natural Medicines,China Pharmaceutical University(No.SKLNMZZCX201816)the National Science and Technology Major Project(2017ZX09101001)the financial support from Development Funds for Priority Academic Programs in Jiangsu Higher Education Institutions-Young Talent Program。
文摘Stimuli-triggered drug delivery systems hold vast promise in local infection treatment for the site-specific targeting and shuttling of drugs.Herein,chitosan conjugates(SPCS)installed with sialic acid(SA)and phenylboronic acid(PBA)were synthesized,of which SA served as targeting ligand for coccidium and reversible-binding bridge for PBA.The enhanced drug-loading capacity of SPCS micelles was attributed to a combination assembly from hydrophobicity-driving and reversible borate bridges.The drug-loaded SPCS micelles shared superior biostability in upper gastrointestinal tract.After reaching the lesions,the borate bridges were snipped by carbohydrates under a higher pH followed by accelerated drug release,while SA exposure on micellar surface facilitated drug cellular internalization to eliminate parasites inside.The drugmicelles revealed an enhanced anti-coccidial capacity with a higher index of 185.72 compared with commercial preparation.The dual-responsive combination of physicochemical assembly could provide an efficient strategy for the exploitation of stable,safe and flexible anti-infectious drug delivery systems.
