The lunar surface and its deep layers contain abundant resources and valuable information resources,the exploration and exploitation of which are important for the sustainable development of the human economy and soci...The lunar surface and its deep layers contain abundant resources and valuable information resources,the exploration and exploitation of which are important for the sustainable development of the human economy and society.Technological exploration and research in the field of deep space science,especially lunar-based exploration,is a scientific strategy that has been pursued in China and worldwide.Drilling and sampling are key to accurate exploration of the desirable characteristics of deep lunar resources.In this study,an in-situ condition preserved coring(ICP-Coring)and analysis system,which can be used to test drilling tools and develop effective sampling strategies,was designed.The key features of the system include:(1)capability to replicate the extreme temperature fluctuations of the lunar environment(-185 to 200℃)with intelligent temperature control;(2)ability to maintain a vacuum environment at a scale of 10^(-3) Pa,both under unloaded conditions within Ф580 mm×1000 mm test chamber,and under loaded conditions using Ф400 mm×800 mm lunar rock simulant;(3)application of axial pressures up to 4 MPa and confining pressures up to 3.5 MPa;(4)sample rotation at any angle with a maximum sampling length of 800 mm;and(5)multiple modes of rotary-percussive drilling,controlled by penetration speed and weight on bit(WOB).Experimental studies on the drilling characteristics in the lunar rock simulant-loaded state under different drill bit-percussive-vacuum environment configurations were conducted.The results show that the outgassing rate of the lunar soil simulant is greater than that of the lunar rock simulant and that a low-temperature environment contributes to a reduced vacuum of the lunar-based simulated environment.The rotary-percussive drilling method effectively shortens the sampling time.With increasing sampling depth,the temperature rise of the drilling tools tends to rapidly increase,followed by slow growth or steady fluctuations.The temperature rise energy accumulation of the drill bits under vacuum is more significant than that under atmospheric pressure,approximately 1.47 times higher.The real-time monitored drilling pressure,penetration speed and rotary torque during drilling serve as parameters for discriminating the drilling status.The results of this research can provide a scientific basis for returning samples from lunar rock in extreme lunar-based environments.展开更多
With the increasing scarcity of Earth’s resources and the development of space science and technology,the exploration, development, and utilization of deep space-specific material resources(minerals, water ice, volat...With the increasing scarcity of Earth’s resources and the development of space science and technology,the exploration, development, and utilization of deep space-specific material resources(minerals, water ice, volatile compounds, etc.) are not only important to supplement the resources and reserves on Earth but also provide a material foundation for establishing extraterrestrial research bases. To achieve large depth in-situ condition-preserved coring(ICP-Coring) in the extreme lunar environment, first, lunar rock simulant was selected(SZU-1), which has a material composition, element distribution, and physical and mechanical properties that are approximately equivalent to those of lunar mare basalt. Second, the influence of the lunar-based in-situ environment on the phase, microstructure, and thermal physical properties(specific heat capacity, thermal conductivity, thermal diffusivity, and thermal expansion coefficient)of SZU-1 was explored and compared with the measured lunar rock data. It was found that in an air atmosphere, low temperature has a more pronounced effect on the relative content of olivine than other temperatures, while in a vacuum atmosphere, the relative contents of olivine and anorthite are significantly affected only at temperatures of approximately-20 and 200 ℃. When the vacuum level is less than100 Pa, the contribution of air conduction can be almost neglected, whereas it becomes dominant above this threshold. Additionally, as the testing temperature increases, the surface of SZU-1 exhibits increased microcracking, fracture opening, and unevenness, while the specific heat capacity, thermal conductivity,and thermal expansion coefficient show nonlinear increases. Conversely, the thermal diffusivity exhibits a nonlinear decreasing trend. The relationship between thermal conductivity, thermal diffusivity, and temperature can be effectively described by an exponential function(R^(2)>0.98). The research results are consistent with previous studies on real lunar rocks. These research findings are expected to be applied in the development of the test and analysis systems of ICP-Coring in a lunar environment and the exploration of the mechanism of machine-rock interaction in the in-situ drilling and coring process.展开更多
In recent years,Pb-free CsSnI_(3) perovskite materials with excellent photoelectric properties as well as low toxicity are attracting much atten-tion in photoelectric devices.However,deep level defects in CsSnI_(3),su...In recent years,Pb-free CsSnI_(3) perovskite materials with excellent photoelectric properties as well as low toxicity are attracting much atten-tion in photoelectric devices.However,deep level defects in CsSnI_(3),such as high density of tin vacancies,structural deformation of SnI_(6)−octahedra and oxidation of Sn^(2+)states,are the major challenge to achieve high-performance CsSnI_(3)-based photoelectric devices with good stability.In this work,defect passivation method is adopted to solve the above issues,and the ultra-stable and high-performance CsSnI_(3) nanowires(NWs)photodetectors(PDs)are fabricated via incorporating 1-butyl-2,3-dimethylimidazolium chloride salt(BMIMCl)into perovskites.Through materials analysis and theoretical calculations,BMIM+ions can effectively passivate the Sn-related defects and reduce the dark current of CsSnI_(3) NW PDs.To further reduce the dark current of the devices,the polymethyl methacrylate is introduced,and finally,the dual passivated CsSnI_(3) NWPDs show ultra-high performance with an ultra-low dark current of 2×10^(-11) A,a responsivity of up to 0.237 A W^(−1),a high detectivity of 1.18×10^(12) Jones and a linear dynamic range of 180 dB.Furthermore,the unpackaged devices exhibit ultra-high stability in device performance after 60 days of storage in air(25℃,50% humidity),with the device performance remaining above 90%.展开更多
The China initiative Accelerator Driven System,CiADS,physics design adopts 162.5 MHz,325 MHz,and 650 MHz cavities,which are driven by the corresponding radio frequency(RF)power system,requiring frequency translation f...The China initiative Accelerator Driven System,CiADS,physics design adopts 162.5 MHz,325 MHz,and 650 MHz cavities,which are driven by the corresponding radio frequency(RF)power system,requiring frequency translation front-end for the RF station.For that application,a general-purpose design front-end prototype has been developed to evaluate the multi-frequency point supported design feasibility.The difficult parts to achieve the requirements of the general-purpose design are reasonable device selection and balanced design.With a carefully selected low-noise wide-band RF mixer and amplifier to balance the performance of multi-frequency supported down-conversion,specially designed LO distribution net to increase isolation between adjacent channels,and external band-pass filter to realize expected up-conversion frequencies,high maintenance and modular front-end generalpurpose design has been implemented.Results of standard parameters show an R2 value of at least 99.991%in the range of-60-10 dBm for linearity,up to 18 dBm for P1dB,and up to 89 dBc for cross talk between adjacent channels.The phase noise spectrum is lower than 80 dBc in the range of 0-1 MHz;cumulative phase noise is 0.006°;and amplitude and phase stability are 0.022%and 0.034°,respectively.展开更多
Hydraulic fracturing technology plays a key role in improving the recovery rate of shale gas.The improvement of permeability in relation to hydraulic fracturing depends on changes brought about by the proppant on the ...Hydraulic fracturing technology plays a key role in improving the recovery rate of shale gas.The improvement of permeability in relation to hydraulic fracturing depends on changes brought about by the proppant on the fracture structure in reservoirs.Then it is of great significance to describe the microscopic changes during this process by means of an accurate theoretical model.In this study,based on the heterogeneity of shale fracture and the compaction and embedment of a proppant,we proposed a permeability model to examine the combined effects of a proppant and stress to describe the change mechanism in permeability.Further,changes in fracture width and porosity were considered,and a calculation model of fracture compressibility under proppant compaction and embedment was proposed.The difference from previous studies is that the compressibility and permeability of supported fractures can be further quantified and analyzed by this model.Moreover,its rationality was verified by publicly released test data.The results show that,the compressive effect of stress and the embedding of proppant both have a negative impact on shale permeability.展开更多
Precise measurements of the cavity forward(Vf)and reflected signals(Vr)are essential for characterizing other key parameters such as the cavity detuning and forward power.In practice,it is challenging to measure V_(f)...Precise measurements of the cavity forward(Vf)and reflected signals(Vr)are essential for characterizing other key parameters such as the cavity detuning and forward power.In practice,it is challenging to measure V_(f) and V_(r) precisely because of cross talk between the forward and reflected channels(e.g.,coupling between the cavity reflected and forward signals in a directional coupler with limited directivity).For DESY,a method based on the cavity differential equation was proposed to precisely calibrate the actual V_(f) and V_(r).In this study,we verified the validity and practicability of this approach for the Chinese ADS front-end demo superconducting linac(CAFe)facility at the Institute of Modern Physics and a compact energy recovery linac(cERL)test machine at KEK.At the CAFe facility,we successfully calibrated the actual V_(f) signal using this method.The result demonstrated that the directivity of directional couplers might seriously affect the accuracy of V_(f) measurement.At the cERL facility,we calibrated the Lorentz force detuning(LFD)using the actual Vf.Our study confirmed that the precise calibration of V_(f) significantly improves the accuracy of the cavity LFD measurement.展开更多
The accurate measurement of parameters such as the cavity-loaded quality factor(Q_(L))and half bandwidth(f_(0.5))is essential for monitoring the performance of superconducting radio-frequency cavities.However,the conv...The accurate measurement of parameters such as the cavity-loaded quality factor(Q_(L))and half bandwidth(f_(0.5))is essential for monitoring the performance of superconducting radio-frequency cavities.However,the conventional"field decay method"employed to calibrate these values requires the cavity to satisfy a"zero-input"condition.This can be challenging when the source impedance is mismatched and produce nonzero forward signals(V_(f))that significantly affect the measurement accuracy.To address this limitation,we developed a modified version of the"field decay method"based on the cavity differential equation.The proposed approach enables the precise calibration of f_(0.5) even under mismatch conditions.We tested the proposed approach on the SRF cavities of the Chinese Accelerator-Driven System Front-End Demo Superconducting Linac and compared the results with those obtained from a network analyzer.The two sets of results were consistent,indicating the usefulness of the proposed approach.展开更多
In the Chinese ADS front-end demo superconducting radiofrequency linac(CAFe)at the Institute of Modern Physics,a burst-noise signal-triggered cavity fault frequently appears during beam commissioning.These events are ...In the Chinese ADS front-end demo superconducting radiofrequency linac(CAFe)at the Institute of Modern Physics,a burst-noise signal-triggered cavity fault frequently appears during beam commissioning.These events are characterized by a rapid burst noise in the cavity pick-up,which may lead to an unexpected low-level radiofrequency(LLRF)response that eventually causes a cavity fault.To eliminate the undesirable reaction of the LLRF control loop,we propose a method that uses a burstnoise detection and processing algorithm integrated into the LLRF feedback controller.This algorithm can prevent undesired regulations in LLRF systems.Data analysis revealed that some burst-noise events did not exhibit measurable energy loss.In contrast,the other events were accompanied by a rapid loss of cavity stored energy and exhibited similarities to the‘‘E-quench’’phenomena reported in other laboratories.A particle-in-cell simulation indicated that the suspected E-quench phenomenon may be related to a plasma formation process inside the cavity.Fortunately,the LLRF algorithm is robust to the two different types of burst-noise events and can significantly mitigate the corresponding cavity faults in CAFe beam commissioning.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52225403,U2013603,52434004,and 52404365)the Program for Guangdong Introducing Innovative and Entrepreneurial Teams(No.2019ZT08G315)+2 种基金the Shenzhen National Science Fund for Distinguished Young Scholars(No.RCJC20210706091948015)the National Key Research and Development Program of China(2023YFF0615404)the Scientific Instrument Developing Project of Shenzhen University。
文摘The lunar surface and its deep layers contain abundant resources and valuable information resources,the exploration and exploitation of which are important for the sustainable development of the human economy and society.Technological exploration and research in the field of deep space science,especially lunar-based exploration,is a scientific strategy that has been pursued in China and worldwide.Drilling and sampling are key to accurate exploration of the desirable characteristics of deep lunar resources.In this study,an in-situ condition preserved coring(ICP-Coring)and analysis system,which can be used to test drilling tools and develop effective sampling strategies,was designed.The key features of the system include:(1)capability to replicate the extreme temperature fluctuations of the lunar environment(-185 to 200℃)with intelligent temperature control;(2)ability to maintain a vacuum environment at a scale of 10^(-3) Pa,both under unloaded conditions within Ф580 mm×1000 mm test chamber,and under loaded conditions using Ф400 mm×800 mm lunar rock simulant;(3)application of axial pressures up to 4 MPa and confining pressures up to 3.5 MPa;(4)sample rotation at any angle with a maximum sampling length of 800 mm;and(5)multiple modes of rotary-percussive drilling,controlled by penetration speed and weight on bit(WOB).Experimental studies on the drilling characteristics in the lunar rock simulant-loaded state under different drill bit-percussive-vacuum environment configurations were conducted.The results show that the outgassing rate of the lunar soil simulant is greater than that of the lunar rock simulant and that a low-temperature environment contributes to a reduced vacuum of the lunar-based simulated environment.The rotary-percussive drilling method effectively shortens the sampling time.With increasing sampling depth,the temperature rise of the drilling tools tends to rapidly increase,followed by slow growth or steady fluctuations.The temperature rise energy accumulation of the drill bits under vacuum is more significant than that under atmospheric pressure,approximately 1.47 times higher.The real-time monitored drilling pressure,penetration speed and rotary torque during drilling serve as parameters for discriminating the drilling status.The results of this research can provide a scientific basis for returning samples from lunar rock in extreme lunar-based environments.
基金supported by the National Natural Science Foundation of China(Nos.U2013603 and 52225403)the Program for Guangdong Introducing Innovative and Entrepreneurial Teams(No.2019ZT08G315)the Shenzhen National Science Fund for Distinguished Young Scholars(No.RCJC20210706091948015).
文摘With the increasing scarcity of Earth’s resources and the development of space science and technology,the exploration, development, and utilization of deep space-specific material resources(minerals, water ice, volatile compounds, etc.) are not only important to supplement the resources and reserves on Earth but also provide a material foundation for establishing extraterrestrial research bases. To achieve large depth in-situ condition-preserved coring(ICP-Coring) in the extreme lunar environment, first, lunar rock simulant was selected(SZU-1), which has a material composition, element distribution, and physical and mechanical properties that are approximately equivalent to those of lunar mare basalt. Second, the influence of the lunar-based in-situ environment on the phase, microstructure, and thermal physical properties(specific heat capacity, thermal conductivity, thermal diffusivity, and thermal expansion coefficient)of SZU-1 was explored and compared with the measured lunar rock data. It was found that in an air atmosphere, low temperature has a more pronounced effect on the relative content of olivine than other temperatures, while in a vacuum atmosphere, the relative contents of olivine and anorthite are significantly affected only at temperatures of approximately-20 and 200 ℃. When the vacuum level is less than100 Pa, the contribution of air conduction can be almost neglected, whereas it becomes dominant above this threshold. Additionally, as the testing temperature increases, the surface of SZU-1 exhibits increased microcracking, fracture opening, and unevenness, while the specific heat capacity, thermal conductivity,and thermal expansion coefficient show nonlinear increases. Conversely, the thermal diffusivity exhibits a nonlinear decreasing trend. The relationship between thermal conductivity, thermal diffusivity, and temperature can be effectively described by an exponential function(R^(2)>0.98). The research results are consistent with previous studies on real lunar rocks. These research findings are expected to be applied in the development of the test and analysis systems of ICP-Coring in a lunar environment and the exploration of the mechanism of machine-rock interaction in the in-situ drilling and coring process.
基金We acknowledge grants from the National Natural Science Foundation of China(Nos.51972101,62074117,12134010)the Shenzhen Fundamental Research Program(No.JCYJ20190808152609307).
文摘In recent years,Pb-free CsSnI_(3) perovskite materials with excellent photoelectric properties as well as low toxicity are attracting much atten-tion in photoelectric devices.However,deep level defects in CsSnI_(3),such as high density of tin vacancies,structural deformation of SnI_(6)−octahedra and oxidation of Sn^(2+)states,are the major challenge to achieve high-performance CsSnI_(3)-based photoelectric devices with good stability.In this work,defect passivation method is adopted to solve the above issues,and the ultra-stable and high-performance CsSnI_(3) nanowires(NWs)photodetectors(PDs)are fabricated via incorporating 1-butyl-2,3-dimethylimidazolium chloride salt(BMIMCl)into perovskites.Through materials analysis and theoretical calculations,BMIM+ions can effectively passivate the Sn-related defects and reduce the dark current of CsSnI_(3) NW PDs.To further reduce the dark current of the devices,the polymethyl methacrylate is introduced,and finally,the dual passivated CsSnI_(3) NWPDs show ultra-high performance with an ultra-low dark current of 2×10^(-11) A,a responsivity of up to 0.237 A W^(−1),a high detectivity of 1.18×10^(12) Jones and a linear dynamic range of 180 dB.Furthermore,the unpackaged devices exhibit ultra-high stability in device performance after 60 days of storage in air(25℃,50% humidity),with the device performance remaining above 90%.
文摘The China initiative Accelerator Driven System,CiADS,physics design adopts 162.5 MHz,325 MHz,and 650 MHz cavities,which are driven by the corresponding radio frequency(RF)power system,requiring frequency translation front-end for the RF station.For that application,a general-purpose design front-end prototype has been developed to evaluate the multi-frequency point supported design feasibility.The difficult parts to achieve the requirements of the general-purpose design are reasonable device selection and balanced design.With a carefully selected low-noise wide-band RF mixer and amplifier to balance the performance of multi-frequency supported down-conversion,specially designed LO distribution net to increase isolation between adjacent channels,and external band-pass filter to realize expected up-conversion frequencies,high maintenance and modular front-end generalpurpose design has been implemented.Results of standard parameters show an R2 value of at least 99.991%in the range of-60-10 dBm for linearity,up to 18 dBm for P1dB,and up to 89 dBc for cross talk between adjacent channels.The phase noise spectrum is lower than 80 dBc in the range of 0-1 MHz;cumulative phase noise is 0.006°;and amplitude and phase stability are 0.022%and 0.034°,respectively.
基金financially supported by the National Natural Science Foundation of China(Grants No.52064007,51804085,and 51911530203)supported by Guizhou Provincial Science and Technology Projects(Qianke Combination Foundation-ZK[2021]Key 052)
文摘Hydraulic fracturing technology plays a key role in improving the recovery rate of shale gas.The improvement of permeability in relation to hydraulic fracturing depends on changes brought about by the proppant on the fracture structure in reservoirs.Then it is of great significance to describe the microscopic changes during this process by means of an accurate theoretical model.In this study,based on the heterogeneity of shale fracture and the compaction and embedment of a proppant,we proposed a permeability model to examine the combined effects of a proppant and stress to describe the change mechanism in permeability.Further,changes in fracture width and porosity were considered,and a calculation model of fracture compressibility under proppant compaction and embedment was proposed.The difference from previous studies is that the compressibility and permeability of supported fractures can be further quantified and analyzed by this model.Moreover,its rationality was verified by publicly released test data.The results show that,the compressive effect of stress and the embedding of proppant both have a negative impact on shale permeability.
基金supported by the project of “studies of intelligent LLRF control algorithms for superconducting RF cavities(No.E129851YR0)”。
文摘Precise measurements of the cavity forward(Vf)and reflected signals(Vr)are essential for characterizing other key parameters such as the cavity detuning and forward power.In practice,it is challenging to measure V_(f) and V_(r) precisely because of cross talk between the forward and reflected channels(e.g.,coupling between the cavity reflected and forward signals in a directional coupler with limited directivity).For DESY,a method based on the cavity differential equation was proposed to precisely calibrate the actual V_(f) and V_(r).In this study,we verified the validity and practicability of this approach for the Chinese ADS front-end demo superconducting linac(CAFe)facility at the Institute of Modern Physics and a compact energy recovery linac(cERL)test machine at KEK.At the CAFe facility,we successfully calibrated the actual V_(f) signal using this method.The result demonstrated that the directivity of directional couplers might seriously affect the accuracy of V_(f) measurement.At the cERL facility,we calibrated the Lorentz force detuning(LFD)using the actual Vf.Our study confirmed that the precise calibration of V_(f) significantly improves the accuracy of the cavity LFD measurement.
基金supported by the project of Large Research Infrastructures"China initiative Accelerator-Driven System"(No.2017-000052-75-01-000590)"Studies of intelligent LLRF control algorithms for superconducting RF cavities"(No.E129851YR0)the National Natural Science Foundation of China(No.12205344).
文摘The accurate measurement of parameters such as the cavity-loaded quality factor(Q_(L))and half bandwidth(f_(0.5))is essential for monitoring the performance of superconducting radio-frequency cavities.However,the conventional"field decay method"employed to calibrate these values requires the cavity to satisfy a"zero-input"condition.This can be challenging when the source impedance is mismatched and produce nonzero forward signals(V_(f))that significantly affect the measurement accuracy.To address this limitation,we developed a modified version of the"field decay method"based on the cavity differential equation.The proposed approach enables the precise calibration of f_(0.5) even under mismatch conditions.We tested the proposed approach on the SRF cavities of the Chinese Accelerator-Driven System Front-End Demo Superconducting Linac and compared the results with those obtained from a network analyzer.The two sets of results were consistent,indicating the usefulness of the proposed approach.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB34010000)Large Research Infrastructures China initiative Accelerator Driven System(2017-000052-75-01-000590)+1 种基金National Natural Science Foundation of China(No.12175283)Studies of intelligent LLRF control algorithms for SC RF cavities(No.E129851YR0).
文摘In the Chinese ADS front-end demo superconducting radiofrequency linac(CAFe)at the Institute of Modern Physics,a burst-noise signal-triggered cavity fault frequently appears during beam commissioning.These events are characterized by a rapid burst noise in the cavity pick-up,which may lead to an unexpected low-level radiofrequency(LLRF)response that eventually causes a cavity fault.To eliminate the undesirable reaction of the LLRF control loop,we propose a method that uses a burstnoise detection and processing algorithm integrated into the LLRF feedback controller.This algorithm can prevent undesired regulations in LLRF systems.Data analysis revealed that some burst-noise events did not exhibit measurable energy loss.In contrast,the other events were accompanied by a rapid loss of cavity stored energy and exhibited similarities to the‘‘E-quench’’phenomena reported in other laboratories.A particle-in-cell simulation indicated that the suspected E-quench phenomenon may be related to a plasma formation process inside the cavity.Fortunately,the LLRF algorithm is robust to the two different types of burst-noise events and can significantly mitigate the corresponding cavity faults in CAFe beam commissioning.
