High voltage is necessary for high energy lithium-ion batteries but difficult to achieve because of the highly deteriorated cyclability of the batteries.A novel strategy is developed to extend cyclability of a high vo...High voltage is necessary for high energy lithium-ion batteries but difficult to achieve because of the highly deteriorated cyclability of the batteries.A novel strategy is developed to extend cyclability of a high voltage lithium-ion battery,LiNi_(0.5)Mn_(1.5)O_(4)/Graphite(LNMO/Graphite)cell,which emphasizes a rational design of an electrolyte additive that can effectively construct protective interphases on anode and cathode and highly eliminate the effect of hydrogen fluoride(HF).5-Trifluoromethylpyridine-trime thyl lithium borate(LTFMP-TMB),is synthesized,featuring with multi-functionalities.Its anion TFMPTMB-tends to be enriched on cathode and can be preferentially oxidized yielding TMB and radical TFMP-.Both TMB and radical TFMP can combine HF and thus eliminate the detrimental effect of HF on cathode,while the TMB dragged on cathode thus takes a preferential oxidation and constructs a protective cathode interphase.On the other hand,LTFMP-TMB is preferentially reduced on anode and constructs a protective anode interphase.Consequently,a small amount of LTFMP-TMB(0.2%)in 1.0 M LiPF6in EC/DEC/EMC(3/2/5,wt%)results in a highly improved cyclability of LNMO/Graphite cell,with the capacity retention enhanced from 52%to 80%after 150 cycles at 0.5 C between 3.5 and 4.8 V.The as-developed strategy provides a model of designing electrolyte additives for improving cyclability of high voltage batteries.展开更多
Developing wide-temperature and high-safety lithium-ion batteries(LIBs)presents significant challenges attributed to the absence of suitable solvents possessing broad liquid range and non-flammability properties.γ-Bu...Developing wide-temperature and high-safety lithium-ion batteries(LIBs)presents significant challenges attributed to the absence of suitable solvents possessing broad liquid range and non-flammability properties.γ-Butyrolactone(GBL)has emerged as a promising solvent;however,its incompatibility with graphite anode has hindered its application.This limitation necessitates a comprehensive investigation into the underlying mechanisms and potential solutions.In this study,we achieve a molecular-level understanding of the perplexing interphase formation process by employing in-situ spectroelectrochemical techniques and density function calculations.Our findings reveal that,even at high salt concentrations,GBL consistently occupies the primary Li^(+)solvation sheath,leading to extensive GBL decomposition and the formation of a high-impedance and inorganic-poor solid-electrolyte interphase(SEI)layer.Contrary to manipulating solvation structures,our research demonstrates that the utilization of filmforming additives with higher reduction potential facilitates the pre-establishment of a robust SEI film on the graphite anode.This approach effectively inhibits GBL decomposition and significantly enhances the battery's lifespan.This study provides the first reported intrinsic understanding of the unique GBLgraphite incompatibility and offers valuable insights for the development of wide-temperature and high-safety LIBs.展开更多
Owing to the high specific capacity and high voltage,Ni-rich(LiNi0.8Co0.1Mn0.1O2,LNCM811)cathode has been considered as one of the most promising candidate cathode materials for next generation lithium ion batteries,w...Owing to the high specific capacity and high voltage,Ni-rich(LiNi0.8Co0.1Mn0.1O2,LNCM811)cathode has been considered as one of the most promising candidate cathode materials for next generation lithium ion batteries,whereas severe capacity fading greatly hinders its practical application.Notably,the compatibility of Ni-rich materials with LiBF4-containing electrolyte has not yet been realized.Herein,1 M LiPF6-based electrolyte with introducing 2 M LiBF4 is proposed to dramatically improve the cyclic stability of high voltage LNCM811/Li half-cell.Addition of high concentrated LiBF4 improves the moisture stability of electrolyte,which hinders the generation of harmful by-product HF,resulting in improved interfacial stability of LNCM811.Lithium plating/stripping reaction of Li/Li symmetric cell confirms that the enhanced cyclic stability is ascribed to the improved interfacial stability of LNCM811 instead of lithium electrode.Morphology and composition characterization results reveal that LiBF4 participates in the CEI film-forming reaction,resulting in suppressed oxidation of electrolyte and interfacial structural destruction of LNCM811.展开更多
High energy density lithium-ion batteries using Ni-rich cathode(such as LiNi0.6Co0.2Mn0.2O2) suffer from severe capacity decay.P-toluenesulfonyl fluoride(pTSF) has been investigated as a novel film-forming electrolyte...High energy density lithium-ion batteries using Ni-rich cathode(such as LiNi0.6Co0.2Mn0.2O2) suffer from severe capacity decay.P-toluenesulfonyl fluoride(pTSF) has been investigated as a novel film-forming electrolyte additive to enhance the cycling performances of graphite/LiNi0.6Co0.2Mn0.2O2 pouch cell.In comparison with the baseline electrolyte,a small dose of pTSF can significantly improve the cyclic stability of the cell.Theoretical calculations together with experimental results indicate that pTSF would be oxidized and reduced to construct protective interphase film on the surfaces of LiNi0.6Co0.2Mn0.2O2 cathode and graphite anode,respectively.These S-containing surface films derived from pTSF effectively mitigate the decomposition of electrolyte,reduce the interphasial impedance,as well as prevent the dissolution of transition metal ions from Ni-rich cathode upon cycling at high voltage.This finding is beneficial for the practical application of high energy density graphite/LiNi0.6Co0.2Mn0.2O2 cells.展开更多
A novel bismuth–carbon composite, in which bismuth nanoparticles were anchored in a nitrogen-doped carbon matrix(Bi@NC), is proposed as anode for high volumetric energy density lithium ion batteries(LIBs).Bi@NC compo...A novel bismuth–carbon composite, in which bismuth nanoparticles were anchored in a nitrogen-doped carbon matrix(Bi@NC), is proposed as anode for high volumetric energy density lithium ion batteries(LIBs).Bi@NC composite was synthesized via carbonization of Zn-containing zeolitic imidazolate(ZIF-8) and replacement of Zn with Bi, resulting in the N-doped carbon that was hierarchically porous and anchored with Bi nanoparticles. The matrix provides a highly electronic conductive network that facilitates the lithiation/delithiation of Bi.Additionally, it restrains aggregation of Bi nanoparticles and serves as a buffer layer to alleviate the mechanical strain of Bi nanoparticles upon Li insertion/extraction.With these contributions, Bi@NC exhibits excellent cycling stability and rate capacity compared to bare Bi nanoparticles or their simple composites with carbon. This study provides a new approach for fabricating high volumetric energy density LIBs.展开更多
Li-metal is an ideal anode that can provide rechargeable batteries with high energy density,but its application in large scale is restricted by its high activity that leads to the severe decomposition of electrolyte c...Li-metal is an ideal anode that can provide rechargeable batteries with high energy density,but its application in large scale is restricted by its high activity that leads to the severe decomposition of electrolyte components(solvents and salts) and the growth of Li dendrites.These parasitic reactions are responsible for the cycle life deterioration and the safety accidents of rechargeable Li-metal batteries.Correspondingly,much effort has been made to regulate Li/electrolyte interface chemistry.In this review,we summarize some strategies that have been developed recently to stabilize Li/electrolyte interface by constructing protective interphases on Li-metal anodes.Firstly,the currently available understandings on the instability of Li/electrolyte interface are outlined.Then,artificial interphases recently constructed exsitu and in-situ are illustrated in detail.Finally,possible approaches to acquire more efficiently protective interphases are prospected.展开更多
"Dissolution,migration,and deposition"of transition metal ions (TMIs) result in capacity degradation of lithium-ion batteries (LIBs).Understanding such detrimental mechanism of TMIs is critical to the develo..."Dissolution,migration,and deposition"of transition metal ions (TMIs) result in capacity degradation of lithium-ion batteries (LIBs).Understanding such detrimental mechanism of TMIs is critical to the development of LIBs with long cycle life.In most previous works,TMIs were directly introduced into the electrolyte to investigate such a detrimental mechanism.In these cases,the TMIs are deposited directly on the fresh anode surface.However,in the practical battery system,the TMIs are deposited on the anode covered with solid electrolyte interphase (SEI) film.Whether the pre-presence of SEI film on anode surface influences the deposition and detriment of TMIs is unclear.In this work,the deposition of Co element on graphite anode with and without SEI film were systematically studied.The results clearly show that,in comparison with that of fresh graphite (SEI-free),the presence of SEI film aggravates the deposition of Co ions due to the Li^(+)–Co^(2+) ion exchange between the SEI and Co^(2+)-containing electrolyte without the driving of the electric field,leading to faster capacity fading of graphite anode.Therefore,how to regulate electrolytes and film-forming additives to design the components of SEI and prevent its exchange with TMIs,is a crucial way to inhibit the deposition and detriment of TMIs on graphite anode.展开更多
A once overlooked source of electrolyte degradation incurred by dissolved manganese(Ⅱ)species in lithium-ion batteries has been identified recently.In order to deactivate the catalytic activity of such manganese(II)i...A once overlooked source of electrolyte degradation incurred by dissolved manganese(Ⅱ)species in lithium-ion batteries has been identified recently.In order to deactivate the catalytic activity of such manganese(II)ion,1-aza-12-crown-4-ether(A12C4)with cavity size well matched manganese(Ⅱ)ion is used in this work as electrolyte additive.Theoretical and experimental results show that stable complex forms between A12C4 and manganese(II)ions in the electrolyte,which does not affect the solvation of Li ions.The strong binding effect of A12C4 additive reduces the charge density of manganese(II)ion and inhibits its destruction of the PF_(6)^(-)structure in the electrolyte,leading to greatly improved thermal stability of manganese(II)ions-containing electrolyte.In addition to bulk electrolyte,A12C4 additive also shows capability in preventing Mn^(2+) from degrading SEI on graphite surface.Such bulk and interphasial stability introduced by A12C4 leads to significantly improved cycling performance of LIBs.展开更多
B-containing electrolyte additives are widely used to enhance the cycle performance at low temperature and the rate capability of lithium-ion batteries by constructing an efficient cathode electrolyte interphase(CEI)t...B-containing electrolyte additives are widely used to enhance the cycle performance at low temperature and the rate capability of lithium-ion batteries by constructing an efficient cathode electrolyte interphase(CEI)to facilitate the rapid Li+migration.Nevertheless,its wide-temperature application has been limited by the instability of B-derived CEI layer at high temperature.Herein,dual electrolyte additives,consisting of lithium tetraborate(Li_(2)TB)and 2,4-difluorobiphenyl(FBP),are proposed to boost the widetemperature performances of LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM)cathode.Theoretical calculation and electrochemical performances analyses indicate that Li_(2)TB and FBP undergo successive decomposition to form a unique dual-layer CEI.FBP acts as a synergistic filming additive to Li_(2)TB,enhancing the hightemperature performance of NCM cathode while preserving the excellent low-temperature cycle stability and the superior rate capability conferred by Li_(2)TB additive.Therefore,the capacity retention of NCM‖Li cells using optimal FBP-Li_(2)TB dual electrolyte additives increases to 100%after 200 cycles at-10℃,99%after 200 cycles at 25℃,and 83%after 100 cycles at 55℃,respectively,much superior to that of base electrolyte(63%/69%/45%).More surprisingly,galvanostatic c ha rge/discharge experiments at different temperatures reveal that NCM‖Li cells using FBP-Li_(2)TB additives can operate at temperatures ranging from-40℃to 60℃.This synergistic interphase modification utilizing dual electrolyte additives to construct a unique dual-layer CEI adaptive to a wide temperature range,provides valuable insights to the practical applications of NCM cathodes for all-climate batteries.展开更多
Lithium-metal battery based on Ni-rich cathode provides high energy density but presents poor cyclic stability due to the unstable electrode/electrolyte interfaces on both cathode and anode.In this work,we report a ne...Lithium-metal battery based on Ni-rich cathode provides high energy density but presents poor cyclic stability due to the unstable electrode/electrolyte interfaces on both cathode and anode.In this work,we report a new strategy to address this issue.It is found that the cyclic stability of Ni-rich/Li battery can be significantly improved by using succinic anhydride(SA) as an electrolyte additive.Specifically,the capacity retention of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)/Li cell is improved from 14% to 83% after 200cycles at 1 C between 3.0 and 4.35 V by applying 5% SA.The underlying mechanism of SA contribution is understood by comparing the effects of malic anhydride(MA) and citraconic anhydride(CA), both of which share a similar molecular structure to SA but show different effects.On anode side,SA can but MA and CA cannot form a protective solid electrolyte interphase(SEI) on Li anode.On cathode side,three anhydrides can suppress the formation of hydrogen fluoride from electrolyte oxidation decomposition,but SA behaves best.Typically,MA shows adverse effects on the interface stability of Li anode and NCM811 cathode,which originates from its high acidity.Though the acidity of MA can be mitigated by substituting a methyl for one H atom at its C=C bond,the substituent CA cannot compete with SA in cyclic stability improvement of the cell,because the SEI resulting from CA is not as robust as that from SA,which is related to the binding energy of the SEI components.This understanding reveals the importance of the electrolyte acidity on the Ni-rich cathode and the robustness of the SEI on Li anode,which is helpful for rationally designing new electrolyte additives to further improve the cyclic stability of high-energydensity Ni-rich/Li batteries.展开更多
Despite the presence of Li F components in the solid electrolyte interphase(SEI)formed on the graphite anode surface by conventional electrolyte,these Li F components primarily exist in an amorphous state,rendering th...Despite the presence of Li F components in the solid electrolyte interphase(SEI)formed on the graphite anode surface by conventional electrolyte,these Li F components primarily exist in an amorphous state,rendering them incapable of effectively inhibiting the exchange reaction between lithium ions and transition metal ions in the electrolyte.Consequently,nearly all lithium ions within the SEI film are replaced by transition metal ions,resulting in an increase in interphacial impedance and a decrease in stability.Herein,we demonstrate that the SEI film,constructed by fluoroethylene carbonate(FEC)additive rich in crystalline Li F,effectively inhibits the undesired Li^(+)/Co^(2+)ion exchange reaction,thereby suppressing the deposition of cobalt compounds and metallic cobalt.Furthermore,the deposited cobalt compounds exhibit enhanced structural stability and reduced catalytic activity with minimal impact on the interphacial stability of the graphite anode.Our findings reveal the crucial influence of SEI film composition and structure on the deposition and hazards associated with transition metal ions,providing valuable guidance for designing next-generation electrolytes.展开更多
Although high salt concentration electrolyte(HCE)can construct effective Li F-rich interphase film and solve the interphasial instability issue of graphite anode,its high cost,high viscosity and poor wettability with ...Although high salt concentration electrolyte(HCE)can construct effective Li F-rich interphase film and solve the interphasial instability issue of graphite anode,its high cost,high viscosity and poor wettability with electrode materials limit its large-scale application.Generally,localized high concentration electrolyte(LHCE)is obtained by introducing an electrochemically inert diluent into HCE to avoid the above-mentioned problems while maintaining the high interphasial stability of HCE with graphite anode.Unlike traditional inert diluents,1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluropropyl ether(TTE)with electrochemical activity is introduced into propylene carbonate(PC)-based HCE to obtain LHCE-2(1 M LiPF_(6),PC:DMC:TTE=1:1:6.1)herein.Experimental and theoretical simulation results show that TTE participates in the oxidation decomposition and film-forming reaction at the NCM622 cathode surface,conducting a cathode electrolyte interphase(CEI)rich in organic fluorides with excellent electron insulation ability,high structural stability and low interphasial impedance.Thanks to the outstanding interphasial properties induced by LHCE-2,the graphite||NMC622 pouch cell reaches a capacity retention of 80%after 500 cycles at 1 C under room temperature.While at sub-zero temperatures,the capacity released by the cell with LHCE-2 electrolyte is significantly higher than that of HCE and conventional EC-based electrolytes.Meanwhile,the LHCE-2 electrolyte inherits the advantages of TTE flame-resistant,thus improving the safety of the battery.展开更多
Compared with graphite,the lower sodiation potential and larger discharge capacity of hard carbon(HC)makes it the most promising anode material for sodium-ion battery.Utilizing ether-based electrolyte rather than conv...Compared with graphite,the lower sodiation potential and larger discharge capacity of hard carbon(HC)makes it the most promising anode material for sodium-ion battery.Utilizing ether-based electrolyte rather than conventional carbonate-based electrolyte,HC achieves superior electrochemical performance.Nevertheless,the mechanism by which ether-based electrolyte improves the properties of HC is still controversial,primarily focusing on whether it forms solid electrolyte interphase(SEI)film.In this work,according to the sodium storage mechanisms in HC at low voltage(<0.1 V),including Na^(+)-diglyme co-interaction into the carbon layer(SEI forbidden)and desolvated Na^(+)insertion in the irregular carbon holes(SEI required),the NaPF6concentration in ether-based electrolyte was regulated,so as to construct a discontinuous-SEI on the surface of the HC anode,which significantly enhances the electrochemical performances of HC.Specifically,with 0.2 M NaPF6ether-based electrolyte,HC deliverers a discharge capacity of 459.7 mA h g^(-1)at 0.1 C and stays at 357.2 mA h g^(-1)after 500 cycles at 1 C,which is substantially higher than that of higher/lower salt concentration electrolytes.展开更多
基金supported by the National Natural Science Foundation of China(22179041)。
文摘High voltage is necessary for high energy lithium-ion batteries but difficult to achieve because of the highly deteriorated cyclability of the batteries.A novel strategy is developed to extend cyclability of a high voltage lithium-ion battery,LiNi_(0.5)Mn_(1.5)O_(4)/Graphite(LNMO/Graphite)cell,which emphasizes a rational design of an electrolyte additive that can effectively construct protective interphases on anode and cathode and highly eliminate the effect of hydrogen fluoride(HF).5-Trifluoromethylpyridine-trime thyl lithium borate(LTFMP-TMB),is synthesized,featuring with multi-functionalities.Its anion TFMPTMB-tends to be enriched on cathode and can be preferentially oxidized yielding TMB and radical TFMP-.Both TMB and radical TFMP can combine HF and thus eliminate the detrimental effect of HF on cathode,while the TMB dragged on cathode thus takes a preferential oxidation and constructs a protective cathode interphase.On the other hand,LTFMP-TMB is preferentially reduced on anode and constructs a protective anode interphase.Consequently,a small amount of LTFMP-TMB(0.2%)in 1.0 M LiPF6in EC/DEC/EMC(3/2/5,wt%)results in a highly improved cyclability of LNMO/Graphite cell,with the capacity retention enhanced from 52%to 80%after 150 cycles at 0.5 C between 3.5 and 4.8 V.The as-developed strategy provides a model of designing electrolyte additives for improving cyclability of high voltage batteries.
基金financially supported by the National Natural Science Foundation of China(21972049,22272175)the National Key R&D Program of China(2022YFA1504002)+3 种基金the“Scientist Studio Funding”from Tianmu Lake Institute of Advanced Energy Storage Technologies Co.,Ltd.Dalian Supports High-Level Talent Innovation and Entrepreneurship Projects(2021RD14)the Dalian Institute of Chemical Physics(DICP I202213)the 21C Innovation Laboratory,Contemporary Ampere Technology Ltd.by project No.21C-OP-202208。
文摘Developing wide-temperature and high-safety lithium-ion batteries(LIBs)presents significant challenges attributed to the absence of suitable solvents possessing broad liquid range and non-flammability properties.γ-Butyrolactone(GBL)has emerged as a promising solvent;however,its incompatibility with graphite anode has hindered its application.This limitation necessitates a comprehensive investigation into the underlying mechanisms and potential solutions.In this study,we achieve a molecular-level understanding of the perplexing interphase formation process by employing in-situ spectroelectrochemical techniques and density function calculations.Our findings reveal that,even at high salt concentrations,GBL consistently occupies the primary Li^(+)solvation sheath,leading to extensive GBL decomposition and the formation of a high-impedance and inorganic-poor solid-electrolyte interphase(SEI)layer.Contrary to manipulating solvation structures,our research demonstrates that the utilization of filmforming additives with higher reduction potential facilitates the pre-establishment of a robust SEI film on the graphite anode.This approach effectively inhibits GBL decomposition and significantly enhances the battery's lifespan.This study provides the first reported intrinsic understanding of the unique GBLgraphite incompatibility and offers valuable insights for the development of wide-temperature and high-safety LIBs.
基金supported by the National Natural Science Foundation of China(21573080)the Guangdong Program for Support of Top-notch Young Professionals(2015TQ01N870)+1 种基金Distinguished Young Scholar(2017B030306013)the Science and Technology Planning Project of Guangdong Province(Grant no.2017B090901020)
文摘Owing to the high specific capacity and high voltage,Ni-rich(LiNi0.8Co0.1Mn0.1O2,LNCM811)cathode has been considered as one of the most promising candidate cathode materials for next generation lithium ion batteries,whereas severe capacity fading greatly hinders its practical application.Notably,the compatibility of Ni-rich materials with LiBF4-containing electrolyte has not yet been realized.Herein,1 M LiPF6-based electrolyte with introducing 2 M LiBF4 is proposed to dramatically improve the cyclic stability of high voltage LNCM811/Li half-cell.Addition of high concentrated LiBF4 improves the moisture stability of electrolyte,which hinders the generation of harmful by-product HF,resulting in improved interfacial stability of LNCM811.Lithium plating/stripping reaction of Li/Li symmetric cell confirms that the enhanced cyclic stability is ascribed to the improved interfacial stability of LNCM811 instead of lithium electrode.Morphology and composition characterization results reveal that LiBF4 participates in the CEI film-forming reaction,resulting in suppressed oxidation of electrolyte and interfacial structural destruction of LNCM811.
基金supported by the National Natural Science Foundation of China (21573080)the Guangdong Program for Support of Distinguished Young Scholar (2017B030306013)the Science and Technology Planning Project of Guangdong Province (2017B090901020)。
文摘High energy density lithium-ion batteries using Ni-rich cathode(such as LiNi0.6Co0.2Mn0.2O2) suffer from severe capacity decay.P-toluenesulfonyl fluoride(pTSF) has been investigated as a novel film-forming electrolyte additive to enhance the cycling performances of graphite/LiNi0.6Co0.2Mn0.2O2 pouch cell.In comparison with the baseline electrolyte,a small dose of pTSF can significantly improve the cyclic stability of the cell.Theoretical calculations together with experimental results indicate that pTSF would be oxidized and reduced to construct protective interphase film on the surfaces of LiNi0.6Co0.2Mn0.2O2 cathode and graphite anode,respectively.These S-containing surface films derived from pTSF effectively mitigate the decomposition of electrolyte,reduce the interphasial impedance,as well as prevent the dissolution of transition metal ions from Ni-rich cathode upon cycling at high voltage.This finding is beneficial for the practical application of high energy density graphite/LiNi0.6Co0.2Mn0.2O2 cells.
基金supported by the Natural Science Foundation of Guangdong Province (Grant No.2017B030306013)the key project of Science and Technology in Guangdong Province (Grant No.2017A010106006)
文摘A novel bismuth–carbon composite, in which bismuth nanoparticles were anchored in a nitrogen-doped carbon matrix(Bi@NC), is proposed as anode for high volumetric energy density lithium ion batteries(LIBs).Bi@NC composite was synthesized via carbonization of Zn-containing zeolitic imidazolate(ZIF-8) and replacement of Zn with Bi, resulting in the N-doped carbon that was hierarchically porous and anchored with Bi nanoparticles. The matrix provides a highly electronic conductive network that facilitates the lithiation/delithiation of Bi.Additionally, it restrains aggregation of Bi nanoparticles and serves as a buffer layer to alleviate the mechanical strain of Bi nanoparticles upon Li insertion/extraction.With these contributions, Bi@NC exhibits excellent cycling stability and rate capacity compared to bare Bi nanoparticles or their simple composites with carbon. This study provides a new approach for fabricating high volumetric energy density LIBs.
基金supported by the National Natural Science Foundation of China(Grant No.21872058)。
文摘Li-metal is an ideal anode that can provide rechargeable batteries with high energy density,but its application in large scale is restricted by its high activity that leads to the severe decomposition of electrolyte components(solvents and salts) and the growth of Li dendrites.These parasitic reactions are responsible for the cycle life deterioration and the safety accidents of rechargeable Li-metal batteries.Correspondingly,much effort has been made to regulate Li/electrolyte interface chemistry.In this review,we summarize some strategies that have been developed recently to stabilize Li/electrolyte interface by constructing protective interphases on Li-metal anodes.Firstly,the currently available understandings on the instability of Li/electrolyte interface are outlined.Then,artificial interphases recently constructed exsitu and in-situ are illustrated in detail.Finally,possible approaches to acquire more efficiently protective interphases are prospected.
基金supported by the National Natural Science Foundation of China (21972049, 21573080)the Guangdong Program for Distinguished Young Scholar (2017B030306013)the Special Funds for the Cultivation of Guangdong College Students’ Scientific and Technological Innovation ("Climbing Program" pdjh2021b0140)。
文摘"Dissolution,migration,and deposition"of transition metal ions (TMIs) result in capacity degradation of lithium-ion batteries (LIBs).Understanding such detrimental mechanism of TMIs is critical to the development of LIBs with long cycle life.In most previous works,TMIs were directly introduced into the electrolyte to investigate such a detrimental mechanism.In these cases,the TMIs are deposited directly on the fresh anode surface.However,in the practical battery system,the TMIs are deposited on the anode covered with solid electrolyte interphase (SEI) film.Whether the pre-presence of SEI film on anode surface influences the deposition and detriment of TMIs is unclear.In this work,the deposition of Co element on graphite anode with and without SEI film were systematically studied.The results clearly show that,in comparison with that of fresh graphite (SEI-free),the presence of SEI film aggravates the deposition of Co ions due to the Li^(+)–Co^(2+) ion exchange between the SEI and Co^(2+)-containing electrolyte without the driving of the electric field,leading to faster capacity fading of graphite anode.Therefore,how to regulate electrolytes and film-forming additives to design the components of SEI and prevent its exchange with TMIs,is a crucial way to inhibit the deposition and detriment of TMIs on graphite anode.
基金supported by the National Natural Science Foundation of China(21972049)the Guangdong Program for Distinguished Young Scholar(2017B030306013)the Science and Technology Planning Project of Guangdong Province(2017B090901020)。
文摘A once overlooked source of electrolyte degradation incurred by dissolved manganese(Ⅱ)species in lithium-ion batteries has been identified recently.In order to deactivate the catalytic activity of such manganese(II)ion,1-aza-12-crown-4-ether(A12C4)with cavity size well matched manganese(Ⅱ)ion is used in this work as electrolyte additive.Theoretical and experimental results show that stable complex forms between A12C4 and manganese(II)ions in the electrolyte,which does not affect the solvation of Li ions.The strong binding effect of A12C4 additive reduces the charge density of manganese(II)ion and inhibits its destruction of the PF_(6)^(-)structure in the electrolyte,leading to greatly improved thermal stability of manganese(II)ions-containing electrolyte.In addition to bulk electrolyte,A12C4 additive also shows capability in preventing Mn^(2+) from degrading SEI on graphite surface.Such bulk and interphasial stability introduced by A12C4 leads to significantly improved cycling performance of LIBs.
基金supported by the National Natural Science Foundation of China(No.21972049)。
文摘B-containing electrolyte additives are widely used to enhance the cycle performance at low temperature and the rate capability of lithium-ion batteries by constructing an efficient cathode electrolyte interphase(CEI)to facilitate the rapid Li+migration.Nevertheless,its wide-temperature application has been limited by the instability of B-derived CEI layer at high temperature.Herein,dual electrolyte additives,consisting of lithium tetraborate(Li_(2)TB)and 2,4-difluorobiphenyl(FBP),are proposed to boost the widetemperature performances of LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM)cathode.Theoretical calculation and electrochemical performances analyses indicate that Li_(2)TB and FBP undergo successive decomposition to form a unique dual-layer CEI.FBP acts as a synergistic filming additive to Li_(2)TB,enhancing the hightemperature performance of NCM cathode while preserving the excellent low-temperature cycle stability and the superior rate capability conferred by Li_(2)TB additive.Therefore,the capacity retention of NCM‖Li cells using optimal FBP-Li_(2)TB dual electrolyte additives increases to 100%after 200 cycles at-10℃,99%after 200 cycles at 25℃,and 83%after 100 cycles at 55℃,respectively,much superior to that of base electrolyte(63%/69%/45%).More surprisingly,galvanostatic c ha rge/discharge experiments at different temperatures reveal that NCM‖Li cells using FBP-Li_(2)TB additives can operate at temperatures ranging from-40℃to 60℃.This synergistic interphase modification utilizing dual electrolyte additives to construct a unique dual-layer CEI adaptive to a wide temperature range,provides valuable insights to the practical applications of NCM cathodes for all-climate batteries.
基金supported by the National Natural Science Foundation of China(Grant No.21872058)。
文摘Lithium-metal battery based on Ni-rich cathode provides high energy density but presents poor cyclic stability due to the unstable electrode/electrolyte interfaces on both cathode and anode.In this work,we report a new strategy to address this issue.It is found that the cyclic stability of Ni-rich/Li battery can be significantly improved by using succinic anhydride(SA) as an electrolyte additive.Specifically,the capacity retention of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)/Li cell is improved from 14% to 83% after 200cycles at 1 C between 3.0 and 4.35 V by applying 5% SA.The underlying mechanism of SA contribution is understood by comparing the effects of malic anhydride(MA) and citraconic anhydride(CA), both of which share a similar molecular structure to SA but show different effects.On anode side,SA can but MA and CA cannot form a protective solid electrolyte interphase(SEI) on Li anode.On cathode side,three anhydrides can suppress the formation of hydrogen fluoride from electrolyte oxidation decomposition,but SA behaves best.Typically,MA shows adverse effects on the interface stability of Li anode and NCM811 cathode,which originates from its high acidity.Though the acidity of MA can be mitigated by substituting a methyl for one H atom at its C=C bond,the substituent CA cannot compete with SA in cyclic stability improvement of the cell,because the SEI resulting from CA is not as robust as that from SA,which is related to the binding energy of the SEI components.This understanding reveals the importance of the electrolyte acidity on the Ni-rich cathode and the robustness of the SEI on Li anode,which is helpful for rationally designing new electrolyte additives to further improve the cyclic stability of high-energydensity Ni-rich/Li batteries.
基金supported by the National Natural Science Foundation of China(21972049,21573080)。
文摘Despite the presence of Li F components in the solid electrolyte interphase(SEI)formed on the graphite anode surface by conventional electrolyte,these Li F components primarily exist in an amorphous state,rendering them incapable of effectively inhibiting the exchange reaction between lithium ions and transition metal ions in the electrolyte.Consequently,nearly all lithium ions within the SEI film are replaced by transition metal ions,resulting in an increase in interphacial impedance and a decrease in stability.Herein,we demonstrate that the SEI film,constructed by fluoroethylene carbonate(FEC)additive rich in crystalline Li F,effectively inhibits the undesired Li^(+)/Co^(2+)ion exchange reaction,thereby suppressing the deposition of cobalt compounds and metallic cobalt.Furthermore,the deposited cobalt compounds exhibit enhanced structural stability and reduced catalytic activity with minimal impact on the interphacial stability of the graphite anode.Our findings reveal the crucial influence of SEI film composition and structure on the deposition and hazards associated with transition metal ions,providing valuable guidance for designing next-generation electrolytes.
基金supported by the National Natural Science Foundation of China (No.21972049)the Guangdong-Hong KongMacao Greater Bay Area Exchange Programs of SCNU (2022)。
文摘Although high salt concentration electrolyte(HCE)can construct effective Li F-rich interphase film and solve the interphasial instability issue of graphite anode,its high cost,high viscosity and poor wettability with electrode materials limit its large-scale application.Generally,localized high concentration electrolyte(LHCE)is obtained by introducing an electrochemically inert diluent into HCE to avoid the above-mentioned problems while maintaining the high interphasial stability of HCE with graphite anode.Unlike traditional inert diluents,1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluropropyl ether(TTE)with electrochemical activity is introduced into propylene carbonate(PC)-based HCE to obtain LHCE-2(1 M LiPF_(6),PC:DMC:TTE=1:1:6.1)herein.Experimental and theoretical simulation results show that TTE participates in the oxidation decomposition and film-forming reaction at the NCM622 cathode surface,conducting a cathode electrolyte interphase(CEI)rich in organic fluorides with excellent electron insulation ability,high structural stability and low interphasial impedance.Thanks to the outstanding interphasial properties induced by LHCE-2,the graphite||NMC622 pouch cell reaches a capacity retention of 80%after 500 cycles at 1 C under room temperature.While at sub-zero temperatures,the capacity released by the cell with LHCE-2 electrolyte is significantly higher than that of HCE and conventional EC-based electrolytes.Meanwhile,the LHCE-2 electrolyte inherits the advantages of TTE flame-resistant,thus improving the safety of the battery.
基金supported by the National Natural Science Foundation of China(No.21972049)。
文摘Compared with graphite,the lower sodiation potential and larger discharge capacity of hard carbon(HC)makes it the most promising anode material for sodium-ion battery.Utilizing ether-based electrolyte rather than conventional carbonate-based electrolyte,HC achieves superior electrochemical performance.Nevertheless,the mechanism by which ether-based electrolyte improves the properties of HC is still controversial,primarily focusing on whether it forms solid electrolyte interphase(SEI)film.In this work,according to the sodium storage mechanisms in HC at low voltage(<0.1 V),including Na^(+)-diglyme co-interaction into the carbon layer(SEI forbidden)and desolvated Na^(+)insertion in the irregular carbon holes(SEI required),the NaPF6concentration in ether-based electrolyte was regulated,so as to construct a discontinuous-SEI on the surface of the HC anode,which significantly enhances the electrochemical performances of HC.Specifically,with 0.2 M NaPF6ether-based electrolyte,HC deliverers a discharge capacity of 459.7 mA h g^(-1)at 0.1 C and stays at 357.2 mA h g^(-1)after 500 cycles at 1 C,which is substantially higher than that of higher/lower salt concentration electrolytes.
